ah, different port. Disregard that hotfix for the moment at least then. No changes to that switch? Sounds eerily like you have a vlan you don't know about ;)
On Tue, Dec 2, 2008 at 4:45 PM, Duane Boudreau <[EMAIL PROTECTED]> wrote: > Sounds similar, but I was just using telnet to try to connect. > >> like this you mean? >> >> http://forums.microsoft.com/TechNet/ShowPost.aspx?PostID=4029760&SiteID=17 >> >> On Tue, Dec 2, 2008 at 4:25 PM, Duane Boudreau <[EMAIL PROTECTED]> >> wrote: >>> I didnt have it on the diagram. A prett vital piece of info I left off >>> there, eh. >>> >>> The issue seems to be something blocking port 139 and 445 inbound on the >>> machine, I can telnet out to another machine on 139 and 445 but not in. >>> I've >>> checked the GUI and the firewall is disabled, the MS tech even disabled >>> using the command prompt as well. Even tried booting in safe mode with >>> networking and still cant telnet out on port 139 or 445. >>> >>> I may get desperate and try windows repair, or just break down and drap a >>> sheet over it and reformat the darn drive. >>> >>> Duane > > > > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~| Adobe® ColdFusion® 8 software 8 is the most important and dramatic release to date Get the Free Trial http://ad.doubleclick.net/clk;207172674;29440083;f Archive: http://www.houseoffusion.com/groups/cf-community/message.cfm/messageid:282024 Subscription: http://www.houseoffusion.com/groups/cf-community/subscribe.cfm Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.5
