Dear Roy et al,

Thank you for the standard name proposals relating to Trac ticket 99 and the 
discussion of these. I have added all the proposals to the standard names 
editor: 
http://cfeditor.ceda.ac.uk/proposals/1?status=active&namefilter=&proposerfilter=Lowry&descfilter=&unitfilter=&yearfilter=&commentfilter=99&filter+and+display=Filter.
 Initially I made entries for both biological_taxon_lsid and 
biological_taxon_identifier and added a note that only one of these will be 
chosen for publication. The discussion seems to be leaning towards choosing 
biological_taxon_lsid so I have now marked biological_taxon_identifier as 
"rejected" and it no longer appears among the active list of proposals. 
However, I can revive it if necessary. As has been discussed, we can add 
further standard names in the future if there is a need to support other 
identifiers besides lsid.

1. biological_taxon_lsid
'The Life Science Identifier (LSID) is a standard URI for a biological taxon. 
Biological taxon is a name or other label identifying an organism or a group of 
organisms as belonging to a unit of classification in a hierarchical taxonomy. 
The LSID is a URN with the syntax "urn:lsid:::[:]". For example, the copepod 
Calocalanus pavo may be represented by LSIDs 
"urn:lsid:marinespecies.org:taxname:104669" (based on WoRMS) and 
"urn:lsid:itis.gov:itis_tsn:85335" (based on ITIS). These URNs may be converted 
to URLs delivering RDF by prefixing with "http://lsid.tdwg.org/";.'

Is this okay? Can we regard this as agreed?

Regarding the other proposals, apart from minor adjustments to make the 
definitions consistent with those of existing names, e.g. the text for "number 
concentration" and for "chlorophyll" I think they are very clear and could be 
accepted pretty much in the form Roy proposed them. I haven't marked them as 
accepted in the editor as yet, because that would cause them to be 
automatically included in the next standard name table update, and I think we 
should wait until Trac ticket 99 is formally agreed before actually putting the 
names in the table. However, I think we can regard them as "agreed". For 
convenience I've listed them in full below.

2. biological_taxon_name
"A plain text human-readable label, usually a Latin binomial such as Calanus 
finmarchicus, applied to a biological taxon. Biological taxon is a name or 
other label identifying an organism or a group of organisms as belonging to a 
unit of classification in a hierarchical taxonomy."

This name is agreed and will be accepted for publication, pending agreement of 
CF Trac ticket #99.

3. number_concentration_of_biological_taxon_in_sea_water (m-3)
' "Number concentration" means the number of particles or other specified 
objects per unit volume. It is used in the construction 
"number_concentration_of_X_in_Y", where X is a material constituent of Y. 
Biological taxon is a name or other label identifying an organism or a group of 
organisms as belonging to a unit of classification in a hierarchical taxonomy. 
Number concentration of biota is also referred to as "abundance".'

This name is agreed and will be accepted for publication, pending agreement of 
CF Trac ticket #99.

4. mass_concentration_of_biological_taxon_expressed_as_carbon_in_sea_water (kg 
m-3)
'Mass concentration means mass per unit volume and is used in the construction 
"mass_concentration_of_X_in_Y", where X is a material constituent of Y. A 
chemical species denoted by X may be described by a single term such as 
"nitrogen" or a phrase such as"nox_expressed_as_nitrogen". The phrase 
"expressed_as" is used in the construction "A_expressed_as_B", where B is a 
chemical constituent of A. It means that the quantity indicated by the standard 
name is calculated solely with respect to the B contained in A, neglecting all 
other chemical constituents of A. Mass concentration of biota expressed as 
carbon is also referred to as "carbon biomass". Biological taxon is a name or 
other label identifying an organism or a group of organisms as belonging to a 
unit of classification in a hierarchical taxonomy.'

This name is agreed and will be accepted for publication, pending agreement of 
CF Trac ticket #99.

5. mass_concentration_of_biological_taxon_expressed_as_chlorophyll_in_sea_water 
(kg m-3)
'Mass concentration means mass per unit volume and is used in the construction 
"mass_concentration_of_X_in_Y", where X is a material constituent of Y. A 
chemical or biological species denoted by X may be described by a single term 
such as "nitrogen" or a phrase such as "nox_expressed_as_nitrogen". The phrase 
"expressed_as" is used in the construction "A_expressed_as_B", where B is a 
chemical constituent of A. It means that the quantity indicated by the standard 
name is calculated solely with respect to the B contained in A, neglecting all 
other chemical constituents of A. Chlorophylls are the green pigments found in 
most plants, algae and cyanobacteria; their presence is essential for 
photosynthesis to take place. There are several different forms of chlorophyll 
that occur naturally. All contain a chlorin ring (chemical formula C20H16N4) 
which gives the green pigment and a side chain whose structure varies. The 
naturally occurring forms of chlorophyll contain between 35 and 55 carbon
  atoms. Biological taxon is a name or other label identifying an organism or a 
group of organisms as belonging to a unit of classification in a hierarchical 
taxonomy.'

This name is agreed and will be accepted for publication, pending agreement of 
CF Trac ticket #99.

6. mass_concentration_of_biological_taxon_expressed_as_nitrogen_in_sea_water 
(kg m-3)
'Mass concentration means mass per unit volume and is used in the construction 
"mass_concentration_of_X_in_Y", where X is a material constituent of Y. A 
chemical species denoted by X may be described by a single term such as 
"nitrogen" or a phrase such as"nox_expressed_as_nitrogen". The phrase 
"expressed_as" is used in the construction "A_expressed_as_B", where B is a 
chemical constituent of A. It means that the quantity indicated by the standard 
name is calculated solely with respect to the B contained in A, neglecting all 
other chemical constituents of A. Mass concentration of biota expressed as 
nitrogen is also referred to as "nitrogen biomass". Biological taxon is a name 
or other label identifying an organism or a group of organisms as belonging to 
a unit of classification in a hierarchical taxonomy.'

This name is agreed and will be accepted for publication, pending agreement of 
CF Trac ticket #99.

7. mole_concentration_of_biological_taxon_expressed_as_carbon_in_sea_water (mol 
m-3)
'Mole concentration means number of moles per unit volume, also called 
"molarity", and is used in the construction "mole_concentration_of_X_in_Y", 
where X is a material constituent of Y. A chemical species denoted by X may be 
described by a single term such as "nitrogen" or a phrase such as 
"nox_expressed_as_nitrogen". The phrase "expressed_as" is used in the 
construction "A_expressed_as_B", where B is a chemical constituent of A. It 
means that the quantity indicated by the standard name is calculated solely 
with respect to the B contained in A, neglecting all other chemical 
constituents of A. Biological taxon is a name or other label identifying an 
organism or a group of organisms as belonging to a unit of classification in a 
hierarchical taxonomy.'

This name is agreed and will be accepted for publication, pending agreement of 
CF Trac ticket #99.

8. mole_concentration_of_biological_taxon_expressed_as_nitrogen_in_sea_water 
(mol m-3)
'Mole concentration means number of moles per unit volume, also called 
"molarity", and is used in the construction "mole_concentration_of_X_in_Y", 
where X is a material constituent of Y. A chemical species denoted by X may be 
described by a single term such as "nitrogen" or a phrase such as 
"nox_expressed_as_nitrogen". The phrase "expressed_as" is used in the 
construction "A_expressed_as_B", where B is a chemical constituent of A. It 
means that the quantity indicated by the standard name is calculated solely 
with respect to the B contained in A, neglecting all other chemical 
constituents of A. Biological taxon is a name or other label identifying an 
organism or a group of organisms as belonging to a unit of classification in a 
hierarchical taxonomy.'

This name is agreed and will be accepted for publication, pending agreement of 
CF Trac ticket #99.

I will also look at the ticket itself and add some comments.

Best wishes,
Alison

------
Alison Pamment                                 Tel: +44 1235 778065
NCAS/Centre for Environmental Data Archival    Email: alison.pamm...@stfc.ac.uk
STFC Rutherford Appleton Laboratory     
R25, 2.22
Harwell Oxford, Didcot, OX11 0QX, U.K.

From: CF-metadata [mailto:cf-metadata-boun...@cgd.ucar.edu] On Behalf Of Lowry, 
Roy K.
Sent: 20 April 2018 10:43
To: Daniel Neumann <daniel.neum...@io-warnemuende.de>; cf-metadata@cgd.ucar.edu
Subject: Re: [CF-metadata] Fw: Standard Names to support Trac ticket 99

Hello Daniel,

The point that seems to have been missed is that the LSID is an umbrella 
covering BOTH ITIS and WoRMS plus other taxonomies from other parts of the 
world. For oceanographic data my strong recommendation would be that WoRMS be 
the first port of call because as your colleagues rightly state the coverage 
for marine organisms is so much better. In this case, the LSID is built from 
the AphiaID, which should be familiar to your colleagues, by adding a simple 
fixed prefix. As I explained to John Graybeal if identifiers that aren't 
encodable into LSIDs are required then we simply need to add another Standard 
Name for the taxon dimension.

Regarding your other point, I am following the model set up by the EurOBIS 
community for encoding biological oceanographic data into SeaDataNet, based on 
the Darwin Core format. In this the 'metadata' parameters you mention are split 
between the taxon dimension (gender, stage) and the 'time' (i.e. sample) 
dimension (size, size minimum, size maximum, number in sample, etc., etc.). All 
that is needed to fit them into what I'm proposing is the creation of 
appropriate Standard Names. However, the CF standard practice is not to set up 
Standard Names until the need arises - i.e. somebody wants to actually encode a 
plankton survey into CF NetCDF. My crystal ball tells me this pressure will 
come before too long from SeaDataNet/SeaDataCloud.

Cheers, Roy.

Please note that I partially retired on 01/11/2015. I am now only working 7.5 
hours a week and can only guarantee e-mail response on Wednesdays, my day in 
the office. All vocabulary queries should be sent to 
mailto:enquir...@bodc.ac.uk. Please also use this e-mail if your requirement is 
urgent.

________________________________________
From: CF-metadata on behalf of Daniel Neumann 
Sent: 20 April 2018 10:12
To: mailto:cf-metadata@cgd.ucar.edu
Subject: Re: [CF-metadata] Fw: Standard Names to support Trac ticket 99 
Hi Roy, Hi List,

I talked to people from the data management department of my current 
institution (IOW, Germany) today. Some researchers at IOW do quite detailed 
Phyto- and Zooplankton surveys and also some other "life form" surveys in the 
Baltic Sea. Therefore, our data management people have some experience in the 
requirements of this field of research.

They would favor a concept which is expendable by further data bases. ITIS 
seems to lack a lot of marine species living in the Baltic Sea. At least in the 
past it seemed to be focused on North American waters. WoRMS seems to include 
most of them. The German Federal Maritime and Hydrographic Agency also seems to 
require WoRMS IDs when my colleagues submit data to them. Maybe there are 
specific databases for Australian or Chinese marine regions ... . They don't 
have experience with LSIDs and did not comment on that. 

The life stage (not sure, if this is the correct English word) and the size 
class are parameters, which are recorded in our plankton abundance surveys. The 
biomass is often estimated by the product "abundance" times 
"size-class-and-region-depending factor". Therefore, size class seems to be 
relevant meta data. Different researcher communities and in different regions 
seem to have different size categorizations. If we look into fish, the life 
stage and maybe also the gender are important parameters. The life stage and 
size class are probably important also for modelers. Therefore, we could 
consider to include attributes (or further variables?) like 'size class', 
'gender' and 'life stage'.

Cheers
Daniel



On 19.04.2018 18:02, Lowry, Roy K. wrote:
Hi John,

To my thinking your arguments add support for 'biological_taxon_lsid' over 
'biological_taxon_identifier' defined as LSID, which Jonathan prefers and I am 
starting to feel better about. LSIDs backed by the WoRMS and ITIS taxonomies 
cover the biological oceanography use cases known to me. Should use cases 
within the sphere of CF with the need for additional identifiers come along, we 
can accommodate these through the straightforward mechanism of Standard Name 
creation. Remember Standard Name creation is on a 'current needs' basis, not 
setting up to cover possible future needs.

Note the initial solution is designed to be semantically verifiable through 
cross-checking the name against the identifier, so having a single 'identifier' 
that can take many forms would not be helpful.

Cheers, Roy.

Please note that I partially retired on 01/11/2015. I am now only working 7.5 
hours a week and can only guarantee e-mail response on Wednesdays, my day in 
the office. All vocabulary queries should be sent to 
mailto:enquir...@bodc.ac.uk. Please also use this e-mail if your requirement is 
urgent.

________________________________________
From: CF-metadata on behalf of John Graybeal 
Sent: 18 April 2018 18:23
To: CF Metadata List
Subject: Re: [CF-metadata] Fw: Standard Names to support Trac ticket 99 
(Please note caveats in my final paragraph.) 

Because I have been in at least one (biomedical) meeting in the last year where 
LSIDs have been dismissed as not good solutions for that community's purposes, 
and because I know there are multiple taxonomy classification systems *and* 
multiple taxonomy identifier systems, I would not support *only* allowing an 
LSID identifier. I think that is inappropriately restrictive. (For those who 
wonder, I assure you there are biomedical applications throughout environmental 
science, and plenty of earth science applications using biomedical resources 
and identifiers. So I think this data point is applicable.)

The way I think about it is that there should be an identifier for the taxon 
that is at a minimum globally unique. And, if at all possible that identifier 
(as is) should be resolvable using standard DNS resolution. As described, an 
LSID URN by itself is not resolvable, but requires an additional prefix. (And 
in some cases some unpleasant escape sequences, but technology adoption will 
slowly overcome that part.)

So I would support one of the following options:
* biological_taxon_identifier by itself, defined as a globally unique and 
resolvable (_as is_) identifier (LSIDs would have to be entered using a 
resolvable form)
* biological_taxon_identifier by itself, recognizing that some identifiers may 
not be resolvable as is (which makes the whole solution less automatically 
computable)
* biological_taxon_identifier (either of the above) plus biological_taxon_lsid 
- that is, provide both options, the user can specify one or both. This way the 
LSID fans can specify the identifier in their terms, and those with a more 
expansive identifier palette can use their identifier of choice. Semantic 
resolution, if not immediately available using existing mappings, can be 
achieved as needed through additional post hoc mappings, consistent with best 
semantic web practices. 

In that vein, I would propose a different definition for the 
biological_taxon_identifier. I am adding that it has to be globally unique, and 
subtracting that it is opaque (because that is a best practice for many 
situations, but not all), but also not using the word label, because that 
implies semantic meaning to me. I specify IRI rather than URI because I 
understand that is the modern form. I am also not favoring LSID in the 
definition based on my historical and present understanding that these are not 
universally accepted in all communities (it is conceivable this is no longer 
true, despite the cited case above); because IMHO the identifier should be an 
IRI in the first place; and because we can specifically offer an LSID 
identifier as well. Finally, I am open to the existence of biologically 
classification system that are not hierarchical. So:

"A globally unique string, most usefully an IRI that resolves to an 
authoritative information source, referencing a specific biological taxon. 
Biological taxon is a defined entity representing an organism or a group of 
organisms as a (typically hierarchical) unit of biological classification."

This is pretty radically different than what has been proposed, and my 
knowledge in the taxonomic classification space is much more from a technical 
perspective, not scientifically authoritative at all. So if I'm the only one 
concerned on these points, I'll get out of the way. Even though I am pretty 
firmly convinced of the importance of using unambiguously semantically 
interoperable and resolvable identifiers, and of the extensive use of non-LSID 
taxonomic identifiers (search 'organism' in BioPortal to find both good and bad 
examples of this). 

John

---------------------------------------
John Graybeal
mailto:jbgrayb...@mindspring.com 
650-450-1853
skype: graybealski
linkedin: http://www.linkedin.com/in/johngraybeal/


On Apr 16, 2018, at 03:10, Lowry, Roy K. <mailto:r...@bodc.ac.uk> wrote:

Forgot to do reply all....

Please note that I partially retired on 01/11/2015. I am now only working 7.5 
hours a week and can only guarantee e-mail response on Wednesdays, my day in 
the office. All vocabulary queries should be sent to 
mailto:enquir...@bodc.ac.uk. Please also use this e-mail if your requirement is 
urgent.

________________________________________
From: Lowry, Roy K.
Sent: 16 April 2018 11:09
To: Daniel Neumann
Subject: Re: [CF-metadata] Standard Names to support Trac ticket 99 
Thanks Daniel,

To clarify LSID isn't a database, it's an identifier for an organism that 
neatly brings together multiple taxonomies under the single umbrella of the 
Catalogue of Life project. It also resolves, actually in multiple ways, into a 
URL that then provides access into a database providing information on that 
organism.

We came to the conclusion that we should use LSIDs in CF in the first round of 
discussions on Trac 99. My quandary is not whether we should use them, but 
whether the Standard Name should specify 'lsid' or just 'identifier'. 
'Identifier' is what we discussed, but 'lsid' opens the door for future 
Standard Names based on other governances should there be a need to deal with 
entities not covered by lsids. I'm aware of one possible issue related to 
coccoliths plus the possibility of dealing with organism parts (e.g. cod 
livers).

Cheers, Roy.

Please note that I partially retired on 01/11/2015. I am now only working 7.5 
hours a week and can only guarantee e-mail response on Wednesdays, my day in 
the office. All vocabulary queries should be sent to 
mailto:enquir...@bodc.ac.uk. Please also use this e-mail if your requirement is 
urgent.

________________________________________
From: Daniel Neumann <mailto:daniel.neum...@io-warnemuende.de>
Sent: 16 April 2018 10:44
To: Lowry, Roy K.
Subject: Re: [CF-metadata] Standard Names to support Trac ticket 99 
Dear Roy,

Thank you for bringing this topic forward!

I contacted the responsible person for our institute's data publishing und 
metadata policy and will talk to her about the choice of the LSID database. She 
is more into that topic than I am. It may take some days.

Cheers,
Daniel

On 13.04.2018 16:02, Lowry, Roy K. wrote:
Dear All,

Here is an initial batch of 8 Standard Names to support the CF taxon dimension. 
Two are dimension labels whilst the other six are measurements to which the 
taxon is a co-ordinate. Five of these are to cover Daniel's proposal that 
prompted the resurrection of Ticket 99.

I've presented a summary list followed by a full list with units and 
definitions. I have one uncertainty in my mind (biological_taxon_label versus 
biological_taxon_lsid) where I would really appreciate input.

Cheers, Roy.

biological_taxon_name
biological_taxon_identifier or biological_taxon_lsid - any preferences????
number_concentration_of_biological_taxon_in_sea_water
mass_concentration_of_biological_taxon_expressed_as_carbon_in_sea_water
mass_concentration_of_biological_taxon_expressed_as_chlorophyll_in_sea_water
mass_concentration_of_biological_taxon_expressed_as_nitrogen_in_sea_water
mole_concentration_of_biological_taxon_expressed_as_carbon_in_sea_water
mole_concentration_of_biological_taxon_expressed_as_nitrogen_in_sea_water
biological_taxon_name

A plaintext human-readable label, usually a Latin binomial such as Calanus 
finmarchicus, applied to a biological taxon. Biological taxon is a name or 
other label identifying an organism or a group of organisms as belonging to a 
unit of classification in a hierarchical taxonomy.

dimensionless

biological_taxon_identifier

An opaque label, most usefully a URI that resolves to an authoritative 
information source, applied to a biological taxon. Biological taxon is a name 
or other label identifying an organism or a group of organisms as belonging to 
a unit of classification in a hierarchical taxonomy. The identifier adopted for 
CF is the Life Science Identifier (LSID), a URN with the syntax 
'urn:lsid:::[:]'. For example, the copepod Calocalanus pavo may be represented 
by LSIDs 'urn:lsid:http://marinespecies.org:taxname:104669' (based on WoRMS) 
and urn:lsid:http://itis.gov:itis_tsn:85335' (based on ITIS). These URNs may be 
converted to URLs delivering RDF by prefixing with 'http://lsid.tdwg.org/'.

dimensionless

OR

biological_taxon_lsid

The Life Science Identifier (LSID) is a standard URI for a biological taxon. 
Biological taxon is a name or other label identifying an organism or a group of 
organisms as belonging to a unit of classification in a hierarchical taxonomy. 
The LSID is a URN with the syntax 'urn:lsid:::[:]'. For example, the copepod 
Calocalanus pavo may be represented by LSIDs 
'urn:lsid:http://marinespecies.org:taxname:104669' (based on WoRMS) and 
urn:lsid:http://itis.gov:itis_tsn:85335' (based on ITIS). These URNs may be 
converted to URLs delivering RDF by prefixing with 'http://lsid.tdwg.org/'.

dimensionless

number_concentration_of_biological_taxon_in_sea_water

Number concentration means the count of an entity per unit volume and is used 
in the construction 'number_concentration_of_X_in_Y', where X is a material 
constituent of Y.. Biological taxon is a name or other label identifying an 
organism or a group of organisms as belonging to a unit of classification in a 
hierarchical taxonomy. Number concentration of biota is also referred to as 
abundance.

m-3

mass_concentration_of_biological_taxon_expressed_as_carbon_in_sea_water

Mass concentration means mass per unit volume and is used in the construction 
'mass_concentration_of_X_in_Y', where X is a material constituent of Y. A 
chemical species denoted by X may be described by a single term such as 
'nitrogen' or a phrase such as
'nox_expressed_as_nitrogen'. The phrase 'expressed_as' is used in the 
construction 'A_expressed_as_B', where B is a chemical constituent of A. It 
means that the quantity indicated by the standard name is calculated solely 
with respect to the B contained in A, neglecting all other chemical 
constituents of A. Mass concentration of biota expressed as carbon is also 
referred to as carbon biomass. Biological taxon is a name or other label 
identifying an organism or a group of organisms as belonging to a unit of 
classification in a hierarchical taxonomy. 

kg m-3


mass_concentration_of_biological_taxon_expressed_as_chlorophyll_in_sea_water

Mass concentration means mass per unit volume and is used in the construction 
'mass_concentration_of_X_in_Y', where X is a material constituent of Y. A 
chemical or biological species denoted by X may be described by a single term 
such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The phrase 
'expressed_as' is used in the
construction 'A_expressed_as_B', where B is a chemical constituent of A. It 
means that the quantity indicated by the standard name is calculated solely 
with respect to the B contained in A, neglecting all other chemical 
constituents of A. Chlorophyll means all naturally occurring pigments of the 
chlorophyll group. Biological taxon is a name or other label identifying an 
organism or a group of organisms as belonging to a unit of classification in a 
hierarchical taxonomy.

kg m-3

mass_concentration_of_biological_taxon_expressed_as_nitrogen_in_sea_water

Mass concentration means mass per unit volume and is used in the construction 
'mass_concentration_of_X_in_Y', where X is a material constituent of Y. A 
chemical species denoted by X may be described by a single term such as 
'nitrogen' or a phrase such as
'nox_expressed_as_nitrogen'. The phrase 'expressed_as' is used in the 
construction 'A_expressed_as_B', where B is a chemical constituent of A. It 
means that the quantity indicated by the standard name is calculated solely 
with respect to the B contained in A, neglecting all other chemical 
constituents of A. Mass concentration of biota expressed as nitrogen is also 
referred to as nitrogen biomass. Biological taxon is a name or other label 
identifying an organism or a group of organisms as belonging to a unit of 
classification in a hierarchical taxonomy.

kg m-3

mole_concentration_of_biological_taxon_expressed_as_carbon_in_sea_water

Mole concentration means number of moles per unit volume, also called 
'molarity', and is used in the construction 'mole_concentration_of_X_in_Y', 
where X is a material constituent of Y. A chemical species denoted by X may be 
described by a single term such as 'nitrogen' or a phrase such as 
'nox_expressed_as_nitrogen'. The phrase 'expressed_as' is used in the 
construction 'A_expressed_as_B', where B is a chemical constituent of A. It 
means that the quantity indicated by the standard name is calculated solely 
with respect to the B contained in A, neglecting all other chemical 
constituents of A. Biological taxon is a name or other label identifying an 
organism or a group of organisms as belonging to a unit of classification in a 
hierarchical taxonomy. 

mol m-3

mole_concentration_of_biological_taxon_expressed_as_nitrogen_in_sea_water

Mole concentration means number of moles per unit volume, also called 
'molarity', and is used in the construction 'mole_concentration_of_X_in_Y', 
where X is a material constituent of Y. A chemical species denoted by X may be 
described by a single term such as 'nitrogen' or a phrase such as 
'nox_expressed_as_nitrogen'. The phrase 'expressed_as' is used in the 
construction 'A_expressed_as_B', where B is a chemical constituent of A. It 
means that the quantity indicated by the standard name is calculated solely 
with respect to the B contained in A, neglecting all other chemical 
constituents of A. Biological taxon is a name or other label identifying an 
organism or a group of organisms as belonging to a unit of classification in a 
hierarchical taxonomy. 

mol m-3


Please note that I partially retired on 01/11/2015. I am now only working 7.5 
hours a week and can only guarantee e-mail response on Wednesdays, my day in 
the office. All vocabulary queries should be sent to 
mailto:enquir...@bodc.ac.uk. Please also use this e-mail if your requirement is 
urgent.
________________________________________
This message (and any attachments) is for the recipient only. NERC is subject 
to the Freedom of Information Act 2000 and the contents of this email and any 
reply you make may be disclosed by NERC unless it is exempt from release under 
the Act. Any material supplied to NERC may be stored in an electronic records 
management system. 
________________________________________


_______________________________________________
CF-metadata mailing list
mailto:CF-metadata@cgd.ucar.edu
http://mailman.cgd.ucar.edu/mailman/listinfo/cf-metadata
--
Daniel Neumann

Leibniz Institute for Baltic Sea Research Warnemuende
Physical Oceanography and Instrumentation
Seestrasse 15
18119 Rostock
Germany

phone:  +49-381-5197-287
fax:    +49-381-5197-114 or 440
e-mail: mailto:daniel.neum...@io-warnemuende.de
________________________________________
This message (and any attachments) is for the recipient only. NERC is subject 
to the Freedom of Information Act 2000 and the contents of this email and any 
reply you make may be disclosed by NERC unless it is exempt from release under 
the Act. Any material supplied to NERC may be stored in an electronic records 
management system. 
________________________________________
_______________________________________________
CF-metadata mailing list
mailto:CF-metadata@cgd.ucar.edu
http://mailman.cgd.ucar.edu/mailman/listinfo/cf-metadata

________________________________________
This message (and any attachments) is for the recipient only. NERC is subject 
to the Freedom of Information Act 2000 and the contents of this email and any 
reply you make may be disclosed by NERC unless it is exempt from release under 
the Act. Any material supplied to NERC may be stored in an electronic records 
management system. 
________________________________________


_______________________________________________
CF-metadata mailing list
mailto:CF-metadata@cgd.ucar.edu
http://mailman.cgd.ucar.edu/mailman/listinfo/cf-metadata


--
Daniel Neumann

Leibniz Institute for Baltic Sea Research Warnemuende
Physical Oceanography and Instrumentation
Seestrasse 15
18119 Rostock
Germany

phone:  +49-381-5197-287
fax:    +49-381-5197-114 or 440
e-mail: mailto:daniel.neum...@io-warnemuende.de
________________________________________
This message (and any attachments) is for the recipient only. NERC is subject 
to the Freedom of Information Act 2000 and the contents of this email and any 
reply you make may be disclosed by NERC unless it is exempt from release under 
the Act. Any material supplied to NERC may be stored in an electronic records 
management system. 
________________________________________
_______________________________________________
CF-metadata mailing list
CF-metadata@cgd.ucar.edu
http://mailman.cgd.ucar.edu/mailman/listinfo/cf-metadata

Reply via email to