Try jamming some black silicone under the moldings. Cut a very small hole in the tip of the tube so you can sort of inject it and not have it going all over the place. Use masking tape on both sides of the seam so you get a clean line, and be as neat as you possibly can with it. You'll need to take the tape off before the silicone dries. I had to do this on mine because my body guy did such a great job of reinstalling my glass. Front & back both leaked to the extent that I could see the water dripping into the cabin, and now it's fine. If all you end up with is a thin black bead right in the crease where the molding meets the body and the glass it will look fine, as long as you don't have a points car, which it sounds like you don't (no offense, me either). Fabricating a special package tray is like the tail wagging the dog.
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Trooper Sent: Saturday, February 25, 2006 11:35 AM To: The Chevelle Mailing List Subject: Re: [Chevelle-list] Package Tray - 69 Chevelle More appropriate maybe but definitely not easier :) Trooper ----- Original Message ----- From: "John Nasta" <[EMAIL PROTECTED]> To: "The Chevelle Mailing List" <Chevelle-list@chevelles.net> Sent: Saturday, February 25, 2006 10:28 AM Subject: Re: [Chevelle-list] Package Tray - 69 Chevelle >I think it would be easier for you to just fix the leaky window. It's going > to have to get fixed anyway. > > > > > >