All, thanks for the tip enclosed is Grove's link I sure hope he can help solve my dilemma on my SS396 clone
Hoke http://www.alangrovecomponents.com/Catalog.htm ----- Original Message ----- From: Rick Schaefer To: The Chevelle Mailing List Sent: Tuesday, March 06, 2007 6:05 PM Subject: Re: [Chevelle-list] Power Steering Pump Brackets Bob I have a 72 SB with headers & A/C, probably the same as 71. I did have to purchase a special bracket for the rear of the A/C compressor, but nothing special for the power steering. Its been a long time since I put it together, but if there was suppose to be more than one bracket for the P/S pump I am running without one. I'd have to look to see exactly whats down there. One thing for sure, Alen Grove makes quality brackets. On 3/6/07, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote: I have a 71SS with a small block, w/air. I understand there are a couple of ways to bracket this power steering pump. One being the standard bracket that is on the rear of the pump that supposedly bolts to the motor mount bolt that goes to the block and then the exhaust manifold bolt - but this car has headers so a stud would have to be used with a double nut on the bracket to secure it. The other way is some brackets (aftermarket) made by some company called Alan Grove Components. These brackets bolt to the block next to the pump area and look like they'll work. Has anyone got any tips or experience, suggestions?? Help. Bob ---------------------------------------------------------------------------- Netscape. Just the Net You Need. -- Rick Schaefer 72 TPI El Camino
