On Thu, Mar 18, 2021 at 10:08 AM Mike Allred <[email protected]> wrote: > > OK... > > Last night I got the OEM Kenwood programming software running using DOSBOX > and it worked great with both radios (I have 2). Of course, I would still > like to get Chirp working. But, this proves that the programming cable and > radios are working correctly. > > I have attached 2 additional debug logs. One using the TK-760G profile in > Chirp and one using the TK-762 profile. > > The 760G profile seemed to do even less than the 760 profile as it didn't > even put the radio in programming mode. > > The 762 profile appears to have behaved exactly as the 760 profile did - > radio goes into programming mode but Chirp errors out. > > > Mike
Unfortunately, neither debug.log file has captured any response from the radio. It is probably going to take capturing the serial port communications during the cloning process. Jim _______________________________________________ chirp_users mailing list [email protected] http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to [email protected] at [email protected] To unsubscribe, send an email to [email protected]
