If the radio's not responding, then there's no data to capture so no tool needed.
> On 18/03/2021 14:28 Mike Allred <[email protected]> wrote: > > > If there is a free and easy to use tool that I could use to capture that info > while using the OEM software, I’d be glad to do so. > > > On Mar 18, 2021, at 11:51 AM, Jim Unroe <[email protected]> wrote: > > > > On Thu, Mar 18, 2021 at 10:08 AM Mike Allred <[email protected]> wrote: > >> > >> OK... > >> > >> Last night I got the OEM Kenwood programming software running using DOSBOX > >> and it worked great with both radios (I have 2). Of course, I would still > >> like to get Chirp working. But, this proves that the programming cable > >> and radios are working correctly. > >> > >> I have attached 2 additional debug logs. One using the TK-760G profile in > >> Chirp and one using the TK-762 profile. > >> > >> The 760G profile seemed to do even less than the 760 profile as it didn't > >> even put the radio in programming mode. > >> > >> The 762 profile appears to have behaved exactly as the 760 profile did - > >> radio goes into programming mode but Chirp errors out. > >> > >> > >> Mike > > > > Unfortunately, neither debug.log file has captured any response from > > the radio. It is probably going to take capturing the serial port > > communications during the cloning process. > > > > Jim > > _______________________________________________ > > chirp_users mailing list > > [email protected] > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > > This message was sent to Mike at [email protected] > > To unsubscribe, send an email to > > [email protected] > > _______________________________________________ > chirp_users mailing list > [email protected] > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Nigel Gunn, W8IFF at [email protected] > To unsubscribe, send an email to > [email protected] Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1-937-971-0366 Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail [email protected] www http://www.ngunn.net _______________________________________________ chirp_users mailing list [email protected] http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to [email protected] at [email protected] To unsubscribe, send an email to [email protected]
