Do you have CTCSS tones set on the receive side. If so, remove them. It’s possible the repeaters aren’t sending a tone back to you..
Stay Safe and Stay Healthy John Miklor https://www.Miklor.com > On Jun 6, 2022, at 10:01 AM, Al Jones <[email protected]> wrote: > > Attached is the image of my 'working' radio - problem is, it's not working > right. This an older Baofeng UV-82L much prior to the recent FCC rule > changes. I am both a licensed ham (KG5HEJ) and GMRS (WQYM836) operator. > Though I recognize the legalities of using this radio, it's use in the GMRS > bands is primarily for monitoring local tourists and providing them with help. > > That all out of the way. RX/TX on any of the ham bands is without problem, I > can talk with anyone on our local repeater system, or simplex, without a > problem (barring mountains which are occasional problems) on the GMRS freqs, > I'm seeing (on my BCT15X scanner) a carrier being transmitted in the > appropriate freq but hearing no voice on the carrier on both the one GMRS > repeater channel and simplex. I and a friend have been all over these > settings and I hope we're just missing the obvious (obvious to someone else.) > > Anyone ??? > > //al KG5HEJ
Baofeng_UV-82_20220531.img
Description: Binary data
> _______________________________________________ > chirp_users mailing list > [email protected] > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to John LaMartina at [email protected] > To unsubscribe, send an email to > [email protected] > To report this email as off-topic, please email > [email protected]
_______________________________________________ chirp_users mailing list [email protected] http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to [email protected] at [email protected] To unsubscribe, send an email to [email protected] To report this email as off-topic, please email [email protected]
