Mike, the original question was regarding chirp, specifically if anyone could see any reason for the oddity I'm seeing. Your suggestion that I haven't investigated outside of Chirp is almost insulting. Have yourself a great day.
//al

------ Original Message ------
From "Mike Riffle" <[email protected]>
To "Discussion of CHIRP" <[email protected]>
Date Mon 6 6 22 15:23:52
Subject Re: [chirp_users] What is wrong here?

I haven't because I heard reports that they cause it to stick but there hasn't been a good discussion that I've seen regarding the symptoms of "sticking".

Maybe because this is a Chirp mailing list and not a UV5R mailing list.


On Mon, Jun 6, 2022 at 3:05 PM K0LNY_Glenn <[email protected]> wrote:
Yes, Mine only does the carrier with no modulation, unless I plug in the speaker-mic.
So without the speaker-mic, it's just the same issue you describe.
I've tried repeated plug-ins to unstick it, but I guess I'm stuck with only using a speaker-mic on that radio.
I don't know if an earphone would do the same to a Baofeng.
HTH.

Glenn
----- Original Message -----
From:Al Jones <mailto:[email protected]>
To:Discussion of CHIRP <mailto:[email protected]>
Sent: Monday, June 06, 2022 1:23 PM
Subject: Re: [chirp_users] What is wrong here?

No, I never have - at least not that I recall. You said that it will only transmit via the speaker mic ... mine is transmitting a carrier but there's no modulation. If your experience is similar, I might try plugging in one of the ones I have. I haven't because I heard reports that they cause it to stick but there hasn't been a good discussion that I've seen regarding the symptoms of "sticking".

------ Original Message ------
From "K0LNY_Glenn" <[email protected]>
To "Discussion of CHIRP" <[email protected]>
Date Mon 6 6 22 12:12:58
Subject Re: [chirp_users] What is wrong here?


Did you ever plug in a speaker microphone?
My UV5R is known for sticking inside and it will only transmit the microphone via the speaker microphone. I don't want to open it up to try and unstick the contact inside the jack.
Glenn

----- Original Message -----
From:Al Jones <mailto:[email protected]>
To:Discussion of CHIRP <mailto:[email protected]>
Sent: Monday, June 06, 2022 11:50 AM
Subject: Re: [chirp_users] What is wrong here?

according to Chirp there is nothing set for tone or DTCS on the GMRS channels (frequencies) lines 31 - 52l the only exception is line 53 where I have a positive offset for the local GMRS repeater.

The problem is that I'm sending a carrier but no voice on the carrier. Reception is fine all the way 'round,

//al

------ Original Message ------
From "John LaMartina" <[email protected]>
To "Discussion of CHIRP" <[email protected]>
Date Mon 6 6 22 11:10:42
Subject Re: [chirp_users] What is wrong here?

Do you have CTCSS tones set on the receive side.
If so, remove them.
It’s possible the repeaters aren’t sending a tone back to you..

Stay Safe and Stay Healthy John Miklor

https://www.Miklor.com
On Jun 6, 2022, at 10:01 AM, Al Jones <[email protected]> wrote:

Attached is the image of my 'working' radio - problem is, it's not working right. This an older Baofeng UV-82L much prior to the recent FCC rule changes. I am both a licensed ham (KG5HEJ) and GMRS (WQYM836) operator. Though I recognize the legalities of using this radio, it's use in the GMRS bands is primarily for monitoring local tourists and providing them with help.

That all out of the way. RX/TX on any of the ham bands is without problem, I can talk with anyone on our local repeater system, or simplex, without a problem (barring mountains which are occasional problems) on the GMRS freqs, I'm seeing (on my BCT15X scanner) a carrier being transmitted in the appropriate freq but hearing no voice on the carrier on both the one GMRS repeater channel and simplex. I and a friend have been all over these settings and I hope we're just missing the obvious (obvious to someone else.)

Anyone ???

//al KG5HEJ

--------------------------------------------------------------------------------

_______________________________________________
chirp_users mailing list
[email protected]
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to K0LNY at [email protected]
To unsubscribe, send an email to [email protected] To report this email as off-topic, please email [email protected]

--------------------------------------------------------------------------------

_______________________________________________
chirp_users mailing list
[email protected]
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to K0LNY at [email protected]
To unsubscribe, send an email to [email protected] To report this email as off-topic, please email [email protected]

_______________________________________________
chirp_users mailing list
[email protected]
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Mike Riffle at [email protected]
To unsubscribe, send an email to [email protected] To report this email as off-topic, please email [email protected]


--
Mike Riffle
KD8KZT
Morgantown WV
_______________________________________________
chirp_users mailing list
[email protected]
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to [email protected] at [email protected]
To unsubscribe, send an email to [email protected]
To report this email as off-topic, please email 
[email protected]

Reply via email to