I understand about "live mode" programming". I also have a Kenwood D710G that programs that way. Whatever the case, one has to start by downloading the radio's current programming prior to editing it. Downloading isn't working, either with the Linux or the Windows version.
I see in the FAQ that ICOM 7100 is a supported radio (since 2017). So, why am I getting the error? Does CHIRP not work via the USB Port? I've seen a number of YouTube videos where folks use RT Systems software to program the ICOM 7100 via the USB port. I'd like to use CHIRP... On Tue, Jul 26, 2022 at 1:34 PM Tony Ling <[email protected]> wrote: > My initial thoughts on this, although I am by no means an expert, is that > FLRIG is a rig control application, whereas CHIRP is a programming tool, > unless used in 'live mode'. > G7TXU > > On Tue, 26 Jul 2022 at 21:03, Michael Nadler KI7QIB < > [email protected]> wrote: > >> ICOM 7100 connected to Linux system via the mini-USB port. FLRIG can >> control the radio through that interface. >> >> Running CHIRP 0.3.0dev, when I try to download from the radio via >> /dev/ttyUSB0, I get a pop-up error message: unicode strings are not >> supported, please encode to bytes: <<gibberish characters>>>". >> >> Are there specific settings I need to have set on the ICOM? >> >> Is CHIRP able to interact with the ICOM-7100 via the mini-USB port? Do I >> have to use the RT-Systems FTDI cable into the audio port? >> >> >> P.S. I also tried running Windows CHIRP daily-20220408. Download from >> radio gets "error" in every entry. >> >> >> -- >> Michael Nadler >> KI7QIB >> _______________________________________________ >> chirp_users mailing list >> [email protected] >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> This message was sent to Tony Ling at [email protected] >> To unsubscribe, send an email to >> [email protected] >> To report this email as off-topic, please email >> [email protected] >> Searchable archive: >> https://www.mail-archive.com/[email protected] > > _______________________________________________ > chirp_users mailing list > [email protected] > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Michael Nadler at [email protected] > To unsubscribe, send an email to > [email protected] > To report this email as off-topic, please email > [email protected] > Searchable archive: > https://www.mail-archive.com/[email protected]
_______________________________________________ chirp_users mailing list [email protected] http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to [email protected] at [email protected] To unsubscribe, send an email to [email protected] To report this email as off-topic, please email [email protected] Searchable archive: https://www.mail-archive.com/[email protected]
