On Tue, Jul 26, 2022 at 4:04 PM Michael Nadler KI7QIB <[email protected]> wrote: > > ICOM 7100 connected to Linux system via the mini-USB port. FLRIG can control > the radio through that interface. > > Running CHIRP 0.3.0dev, when I try to download from the radio via > /dev/ttyUSB0, I get a pop-up error message: unicode strings are not > supported, please encode to bytes: <<gibberish characters>>>". > > Are there specific settings I need to have set on the ICOM? > > Is CHIRP able to interact with the ICOM-7100 via the mini-USB port? Do I > have to use the RT-Systems FTDI cable into the audio port? > > > P.S. I also tried running Windows CHIRP daily-20220408. Download from radio > gets "error" in every entry. > > > -- > Michael Nadler > KI7QIB
I know that when I used CHIRP on my IC-7300, I used a different cable than I did when I used FLRIG. I also had to edit a setting in the radio for CHIRP and change it back for FLRIG. Jim KC9HI _______________________________________________ chirp_users mailing list [email protected] http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to [email protected] at [email protected] To unsubscribe, send an email to [email protected] To report this email as off-topic, please email [email protected] Searchable archive: https://www.mail-archive.com/[email protected]
