Two COM port numbers are assigned to the [USB] connector. One of them is “USB1,” used for cloning and CI-V operation. The other one is “USB2,” whose function is selected in “USB2 Function” item of the “Connectors” Set mode. (p. 6-8)
On Wed, 27 Jul 2022 at 02:58, Jim Unroe <[email protected]> wrote: > On Tue, Jul 26, 2022 at 4:04 PM Michael Nadler KI7QIB > <[email protected]> wrote: > > > > ICOM 7100 connected to Linux system via the mini-USB port. FLRIG can > control the radio through that interface. > > > > Running CHIRP 0.3.0dev, when I try to download from the radio via > /dev/ttyUSB0, I get a pop-up error message: unicode strings are not > supported, please encode to bytes: <<gibberish characters>>>". > > > > Are there specific settings I need to have set on the ICOM? > > > > Is CHIRP able to interact with the ICOM-7100 via the mini-USB port? Do > I have to use the RT-Systems FTDI cable into the audio port? > > > > > > P.S. I also tried running Windows CHIRP daily-20220408. Download from > radio gets "error" in every entry. > > > > > > -- > > Michael Nadler > > KI7QIB > > I know that when I used CHIRP on my IC-7300, I used a different cable > than I did when I used FLRIG. I also had to edit a setting in the > radio for CHIRP and change it back for FLRIG. > > Jim KC9HI > _______________________________________________ > chirp_users mailing list > [email protected] > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Tony Ling at [email protected] > To unsubscribe, send an email to > [email protected] > To report this email as off-topic, please email > [email protected] > Searchable archive: > https://www.mail-archive.com/[email protected] >
_______________________________________________ chirp_users mailing list [email protected] http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to [email protected] at [email protected] To unsubscribe, send an email to [email protected] To report this email as off-topic, please email [email protected] Searchable archive: https://www.mail-archive.com/[email protected]
