On Sat, May 20, 2023 at 10:27 AM David Osborne <[email protected]> wrote: > > Newbie here. I am trying to get some radios working for our VFD. It is a very > small area, so we don't have a lot of money for radios. > I have all the frequencies from a neighboring VFD. Their radios are kenwood > TK-5220. > My problem is that the RX and TX are different frequencies. I have used the > split to put in the TX frequency. After sending to the Tenway UV 82 Pro, I > can receive voice, but I can not send voice. > The Kenwood file shows a QT/DQT Dec and a QT/DQT Enc value. I do not know > where to put this info. in the chirp software. > Thanks for any help you can provide. > -- > *David*
They are the selective squelch (CTCSS tones and/or DCS codes) used by the VFD. They are set up in CHIRP using the Tone Mode and its associated fields. Without knowing what the QT/DQT Dec (receive) and QT/DQT Enc (transmit) values are, it isn't practical to tell you how to set them up in CHIRP. Jim KC9HI _______________________________________________ chirp_users mailing list [email protected] http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to [email protected] at [email protected] To unsubscribe, send an email to [email protected] To report this email as off-topic, please email [email protected] Searchable archive: https://www.mail-archive.com/[email protected]
