On Sun, May 21, 2023 at 9:07 PM David Osborne <[email protected]> wrote:
>
> I have tried several different ways to enter the values with no luck. Here
> are the values.
> QT/DQT Dec is 203.5
> QT/DQT Enc is 203.5
You don't have to program a receive tone so this will set it up with a
TX tone only. Receive is using carrier squelch only.
Tone Mode: Tone
Tone: 203.5 <-- used to set TX CTCSS tone in radio
Tone Squelch: {blank}
But if you want to set up both RX and TX tones this is how it should be set up.
Tone Mode: TSQL
Tone: {blank}
Tone Squelch: 203.5 <-- used to set both RX and TX CTCSS tones in radio
Jim KC9HI
_______________________________________________
chirp_users mailing list
[email protected]
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to [email protected] at [email protected]
To unsubscribe, send an email to [email protected]
To report this email as off-topic, please email
[email protected]
Searchable archive:
https://www.mail-archive.com/[email protected]
