This seems to have worked. Thank you for your help with this. <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail> Virus-free.www.avast.com <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail> <#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
On Sun, May 21, 2023 at 8:21 PM Jim Unroe <[email protected]> wrote: > On Sun, May 21, 2023 at 9:07 PM David Osborne <[email protected]> > wrote: > > > > I have tried several different ways to enter the values with no luck. > Here are the values. > > QT/DQT Dec is 203.5 > > QT/DQT Enc is 203.5 > > You don't have to program a receive tone so this will set it up with a > TX tone only. Receive is using carrier squelch only. > > Tone Mode: Tone > Tone: 203.5 <-- used to set TX CTCSS tone in radio > Tone Squelch: {blank} > > But if you want to set up both RX and TX tones this is how it should be > set up. > > Tone Mode: TSQL > Tone: {blank} > Tone Squelch: 203.5 <-- used to set both RX and TX CTCSS tones in radio > > Jim KC9HI > _______________________________________________ > chirp_users mailing list > [email protected] > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to David at [email protected] > To unsubscribe, send an email to > [email protected] > To report this email as off-topic, please email > [email protected] > Searchable archive: > https://www.mail-archive.com/[email protected] -- **David**
_______________________________________________ chirp_users mailing list [email protected] http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to [email protected] at [email protected] To unsubscribe, send an email to [email protected] To report this email as off-topic, please email [email protected] Searchable archive: https://www.mail-archive.com/[email protected]
