Ahmad Cheikh Moussa wrote: > I want to configure qos on 870 series router. > The goal is to prioritise the VoiP Traffic. > Everytime I wanto to activate the polica-map on the > Interface I got the error mesage "configuration failed".
I haven't needed to do this on an 870 so this is just a guess, but you probably need to attach the policy to a physical interface rather than an SVI. If you only want the policy to affect VLAN 1 then you'll need a nested policy map matching that VLAN. The documentation for 12.4T should describe this and there's also some good info in the Quality of Service solutions design guide (or config guide). You probably also want to use the 'priority' keyword for class VOICE. Regards, Brad _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
