This is my first post on this list. I have a Cisco 7206vxr Router which I am using to terminate DSL connections on my ATM DS3 via PPPoE. I have everything setup and working properly, but I am wanting to use my DHCP server instead of using the IP Pool on the cisco router. Is this possible? I am including my current config as it pertains to the DSL connections.
aaa new-model aaa authentication ppp default local group radius aaa authorization network default group radius aaa accounting network default wait-start group radius vpdn enable ! vpdn-group 1 accept-dialin protocol pppoe virtual-template 1 interface ATM1/0.34 point-to-point description Connection <=> DSL Customer no ip redirects no ip unreachables no ip proxy-arp no ip mroute-cache pvc 2/34 oam-pvc manage encapsulation aal5snap protocol pppoe interface Virtual-Template1 ip unnumbered Loopback1 peer default ip address pool testpool ppp authentication pap Thanks, K _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/