Gerald Krause wrote: > Jose schrieb: > >> We have not been able to change the MTU for the PA-FE-TXs to anything >> larger than the standard 1500. Every time you try and change it, it >> spits back an error about not being allowed on this interface. This is >> with the 7206VXR NPE300 running 12.2(15)T. >> > > We're running up to 1530 on a PA-FE-TX (NPE300/7206VXR with > 12.2(31)SB) because of MPLS: > > Slot 4: > Fast-ethernet (TX-ISL) Port adapter, 1 port > Port adapter is analyzed > Port adapter insertion time 28w3d ago > EEPROM contents at hardware discovery: > Hardware revision 1.0 Board revision A0 > Serial number 3579616 Part number 73-1688-03 > FRU Part Number: PA-FE-TX > > ! > interface FastEthernet4/0 > ... > mtu 1530 > ... > ! > > -- > Gerald (ax/tc) > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > > > __________ NOD32 2991 (20080401) Information __________ > > This message was checked by NOD32 antivirus system. > http://www.eset.com > > > > Awesome! Thanks Gerald. I'll try this code on our lab router and see if it makes the difference. Hopefully I'll still get a chance to upgrade the NPEs to G1s but at least this could let us deploy EoMPLS without having to wait for hardware shipments.
Jose _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
