How about PA-2FE-TX does anybody have a chance to test ? Maybe we need to test it with 12.2(3X)SBX also :) PA-2FE-TX with NPE-G2/7206VXR run 12.4.4-XD9
on slot 5 5/1 foo#mtu ? <64-17940> MTU size in bytes foo#mtu 1570 % Interface FastEthernet5/0 does not support user settable mtu. -- hsa Tuesday, April 1, 2008, 7:34:53 PM, you wrote: > Jose schrieb: >> We have not been able to change the MTU for the PA-FE-TXs to anything >> larger than the standard 1500. Every time you try and change it, it >> spits back an error about not being allowed on this interface. This is >> with the 7206VXR NPE300 running 12.2(15)T. > We're running up to 1530 on a PA-FE-TX (NPE300/7206VXR with > 12.2(31)SB) because of MPLS: > Slot 4: > Fast-ethernet (TX-ISL) Port adapter, 1 port > Port adapter is analyzed > Port adapter insertion time 28w3d ago > EEPROM contents at hardware discovery: > Hardware revision 1.0 Board revision A0 > Serial number 3579616 Part number 73-1688-03 > FRU Part Number: PA-FE-TX > ! > interface FastEthernet4/0 > ... > mtu 1530 > ... > ! > -- > Gerald (ax/tc) > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ -- Best regards, _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
