[EMAIL PROTECTED] (Benny Amorsen) wrote:
> [EMAIL PROTECTED] writes:
>
> > racked a lot of 7200's. never had a problem with them "drooping
> > alarmingly". tighten your screws.
>
> It IS a problem with 1U front mounted stuff. Even 3750's suffer from
> it.
3750s always had the cheapest of housings, 2924s and 2950s suffered
from the same. Interestingly enough, 3560s are quite ok, but that
could be due to their being a bit lighter.
7301 had the exact same case as the 7201 (in fact, 7401 had the
same housing, too) but was not as deep and quite a bit lighter
(power supply in the front) and didn't suffer from tumbling down
the rack.
My solution: Cable ties to a screw... (also helps with 1RU F5
BigIPs which have adequate housing but are much too deep and too heavy).
Yours,
Elmi.
--
"Hinken ist kein Mangel eines Vergleichs, sondern sollte als wesentliche
Eigenschaft von Vergleichen angesehen werden." (Marius Fränzel in desd)
--------------------------------------------------------------[ ELMI-RIPE ]---
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
