Somewhat related to this thread, Is there some sort of 'magic' you have to do with a Sup720 to get it to export flows egress and ingress?
It appears that there is quite a bit of traffic "missing" from the NetFlow data (most of it infact)... I simply applied ip route-cache flow to the layer3 vlans of interest and then setup the export commands as documented. Are there other steps required? Thanks, -Drew -----Original Message----- From: Aaron Glenn [mailto:[EMAIL PROTECTED] Sent: Wednesday, April 30, 2008 7:44 PM To: Drew Weaver Cc: [email protected] Subject: Re: [c-nsp] If BGP is running on a circuit, if you ping the other end you get loss. kill the BGP (and thus the traffic..) no more loss. On Wed, Apr 30, 2008 at 5:54 AM, Drew Weaver <[EMAIL PROTECTED]> wrote: > > So, what are folks using these days for NetFlow analysis (software?) > nfsen and pmacct. excellent open source products. aaron.glenn _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
