ChrisSerafin <> wrote on Thursday, April 02, 2009 17:59:
> I have 3 VRF's on a CE router:
>
>
>
> ip vrf xxx-General
> rd 1:10
> route-target export 1:10
> route-target import 1:10
> !
> ip vrf xxx-Guest
> rd 1:30
> route-target export 1:30
> route-target import 1:30
> !
> ip vrf xxx-Voice
> rd 1:20
> route-target export 1:20
> route-target import 1:20
>
> I just got 3 new VRF's from the ISP confgured, and I'm wondering what
> numbers I need to have for the 'rd' and 'route-target xxport'
> commands...? Are these arbitrary, come from the ISP, or can I just use
> 40, 50, and 60?
In a vrf-lite environment, RDs are local to the router, so you can pick
any (as long as it's unique on the router). you only need route-target
if you're running BGP on the node to leak routes from one VRF to
another.. doesn't look like you're doing any leaking, so I don't think
you need any route-targets
oli
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
