On Thu, 2010-05-20 at 13:53 -0400, Chris Lane wrote: > I need to run Auto QoS for a Cisco soft phone on a 6509 running IOS > 122-33.SXH1 [...] > any help would greatly be appreciated.
Auto-QoS is not always a very good way of doing QoS, but at least it's very easy. On SXI it's something like: Switch(config)# do show run int gi4/24 Building configuration... Current configuration : 62 bytes ! interface GigabitEthernet4/24 no ip address shutdown end Switch(config)# interface gi4/24 Switch(config-if)# switchport Switch(config-if)# auto qos voip cisco-phone (loads of messages) Switch(config-if)# Switch(config-if)# do show run int gi4/24 Building configuration... Current configuration : 931 bytes ! interface GigabitEthernet4/24 switchport shutdown wrr-queue bandwidth 20 100 200 priority-queue queue-limit 5 wrr-queue queue-limit 65 15 15 wrr-queue random-detect min-threshold 1 70 100 100 100 100 100 100 100 wrr-queue random-detect min-threshold 2 70 100 100 100 100 100 100 100 wrr-queue random-detect min-threshold 3 40 40 50 50 60 60 70 70 wrr-queue random-detect max-threshold 1 100 100 100 100 100 100 100 100 wrr-queue random-detect max-threshold 2 100 100 100 100 100 100 100 100 wrr-queue random-detect max-threshold 3 70 70 80 80 90 90 100 100 wrr-queue cos-map 2 1 1 2 wrr-queue cos-map 3 5 3 4 wrr-queue cos-map 3 7 6 7 rcv-queue cos-map 1 2 1 rcv-queue cos-map 1 3 2 rcv-queue cos-map 1 4 3 rcv-queue cos-map 1 5 4 rcv-queue cos-map 1 6 5 rcv-queue cos-map 1 7 6 rcv-queue cos-map 1 8 7 mls qos trust device cisco-phone mls qos trust cos auto qos voip cisco-phone end Switch(config)# Please test this in a lab first, and verify that the configuration suits your needs. And be aware that there are a lot of considerations regarding port-groups and QoS on neighboring ports. -- Peter _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/