Thats interesting. I just tried it and it failed. What line cards do you have? What IOS Thanks for your input.
On Fri, May 21, 2010 at 9:45 AM, Florin Florian <florin.flor...@gmail.com>wrote: > Hi Chris, > > I got the same problem couple of weeks ago. I wasn't able to apply AutoQoS > on the interface and I reverse the proccess. It means I create the AutoQoS > on the lab (emtpy SW configuration) and I applied on production. What I did > was just to apply (copy/paste) the config on the global config and after > that I was able to configure my interfaces for AutoQoS. > > I'm running AutoQoS on Cisco 4506 with Sup6E > > interface GigabitEthernet2/3 > service-policy output AutoQos-VoIP-Output-Policy-queue-only > > interface Port-channel12 > service-policy input AutoQos-VoIP-Input-Cos-Policy > service-policy output AutoQos-VoIP-Output-Policy-non-queue > > class-map match-all AutoQos-VoIP-Bearer-Cos > match cos 5 > class-map match-all AutoQos-VoIP-Control-QosGroup24 > match qos-group 24 > class-map match-all AutoQos-VoIP-Control-QosGroup26 > match qos-group 26 > class-map match-all AutoQos-VoIP-Bearer-QosGroup > match qos-group 46 > class-map match-all AutoQos-VoIP-Control-Cos > match cos 3 > ! > ! > policy-map AutoQos-VoIP-Output-Policy-queue-only > class AutoQos-VoIP-Bearer-QosGroup > priority > class AutoQos-VoIP-Control-QosGroup26 > bandwidth remaining percent 5 > class AutoQos-VoIP-Control-QosGroup24 > bandwidth remaining percent 5 > class class-default > dbl > policy-map AutoQos-VoIP-Input-Cos-Policy > class AutoQos-VoIP-Bearer-Cos > set qos-group 46 > class AutoQos-VoIP-Control-Cos > set qos-group 24 > policy-map AutoQos-VoIP-Output-Policy-non-queue > class AutoQos-VoIP-Bearer-QosGroup > set dscp ef > set cos 5 > police cir 600000000 > class AutoQos-VoIP-Control-QosGroup26 > set dscp af31 > set cos 3 > class AutoQos-VoIP-Control-QosGroup24 > set dscp cs3 > set cos 3 > > I hope that help. > > fflorin > > On Thu, May 20, 2010 at 1:53 PM, Chris Lane <clane1...@gmail.com> wrote: > >> All, >> I need to run Auto QoS for a Cisco soft phone on a 6509 running IOS >> 122-33.SXH1 >> according to the cisco docs this feature was released with this train and >> later. >> i believe its my line cards which are: >> 1 48 48-port 10/100 mb RJ45 WS-X6148-45AF >> SAL085281YQ >> 2 48 48 port 10/100 mb RJ45 WS-X6348-RJ-45 >> SAL0540CQA4 >> 3 48 48-port 10/100 mb RJ45 WS-X6148-RJ45V >> SAL06499J4Q >> 4 48 48-port 10/100 mb RJ45 WS-X6148-RJ45V >> SAL0750QMGV >> >> and i have a Sup720/3bxl >> >> any help would greatly be appreciated. >> >> Regards, >> >> -- >> //CL >> _______________________________________________ >> cisco-nsp mailing list cisco-nsp@puck.nether.net >> https://puck.nether.net/mailman/listinfo/cisco-nsp >> archive at http://puck.nether.net/pipermail/cisco-nsp/ >> >> > -- //CL _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
