Hi Chris, I got the same problem couple of weeks ago. I wasn't able to apply AutoQoS on the interface and I reverse the proccess. It means I create the AutoQoS on the lab (emtpy SW configuration) and I applied on production. What I did was just to apply (copy/paste) the config on the global config and after that I was able to configure my interfaces for AutoQoS.
I'm running AutoQoS on Cisco 4506 with Sup6E interface GigabitEthernet2/3 service-policy output AutoQos-VoIP-Output-Policy-queue-only interface Port-channel12 service-policy input AutoQos-VoIP-Input-Cos-Policy service-policy output AutoQos-VoIP-Output-Policy-non-queue class-map match-all AutoQos-VoIP-Bearer-Cos match cos 5 class-map match-all AutoQos-VoIP-Control-QosGroup24 match qos-group 24 class-map match-all AutoQos-VoIP-Control-QosGroup26 match qos-group 26 class-map match-all AutoQos-VoIP-Bearer-QosGroup match qos-group 46 class-map match-all AutoQos-VoIP-Control-Cos match cos 3 ! ! policy-map AutoQos-VoIP-Output-Policy-queue-only class AutoQos-VoIP-Bearer-QosGroup priority class AutoQos-VoIP-Control-QosGroup26 bandwidth remaining percent 5 class AutoQos-VoIP-Control-QosGroup24 bandwidth remaining percent 5 class class-default dbl policy-map AutoQos-VoIP-Input-Cos-Policy class AutoQos-VoIP-Bearer-Cos set qos-group 46 class AutoQos-VoIP-Control-Cos set qos-group 24 policy-map AutoQos-VoIP-Output-Policy-non-queue class AutoQos-VoIP-Bearer-QosGroup set dscp ef set cos 5 police cir 600000000 class AutoQos-VoIP-Control-QosGroup26 set dscp af31 set cos 3 class AutoQos-VoIP-Control-QosGroup24 set dscp cs3 set cos 3 I hope that help. fflorin On Thu, May 20, 2010 at 1:53 PM, Chris Lane <clane1...@gmail.com> wrote: > All, > I need to run Auto QoS for a Cisco soft phone on a 6509 running IOS > 122-33.SXH1 > according to the cisco docs this feature was released with this train and > later. > i believe its my line cards which are: > 1 48 48-port 10/100 mb RJ45 WS-X6148-45AF > SAL085281YQ > 2 48 48 port 10/100 mb RJ45 WS-X6348-RJ-45 > SAL0540CQA4 > 3 48 48-port 10/100 mb RJ45 WS-X6148-RJ45V > SAL06499J4Q > 4 48 48-port 10/100 mb RJ45 WS-X6148-RJ45V > SAL0750QMGV > > and i have a Sup720/3bxl > > any help would greatly be appreciated. > > Regards, > > -- > //CL > _______________________________________________ > cisco-nsp mailing list cisco-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > > _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/