What does the output of 'sh int switching' look like?
David
On 7/6/2010 2:39 PM, Troy Beisigl wrote:
Actually, we had a bad PA that I replaced, but did not clear the
counters. The errors are not incrementing. I just now cleared the
counters on this interface to make sure. We installed the VIP4/80 to
replace the VIP2/50 that was in there with the same issue except that
it was at 99% CPU 40-60% of the time.
-Troy
_______________________________________________
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
