Yes. There are several multilink PPP and multilink frame-relay interfaces that are across two VIPs that would not do dCEF, but the rest of the traffic in and out of this chassis would/should be. There are 5 PA-MC-T3 cards and 2 PA-2T3 cards in the chassis along with this interface and a PA-FE-TX . I could submit the entire show int switching, but that is a lot of interfaces.

-Troy



On Jul 6, 2010, at 1:09 PM, David Coulson wrote:

What about the other interfaces? It's not using dCEF for a lot of packets. Are there some non-dCEF capable interfaces on that router?

David

On 7/6/2010 4:05 PM, Troy Beisigl wrote:

GigabitEthernet6/0/0 feed to cat1.5/6
         Throttle count       1352
                  Drops         RP      38775         SP          0
            SPD Flushes       Fast      81140        SSE          0
            SPD Aggress       Fast          0
           SPD Priority     Inputs    2868062      Drops          0

   Protocol  IP
         Switching path    Pkts In   Chars In   Pkts Out  Chars Out
                Process  146133204 13154067446  144495681 13312174648
           Cache misses     387970          -          -          -
Fast 6052349545 2435927181795 2395565010 414775807656 Auton/SSE 3659379645 2299485691084 8025990669 7304927055026

   Protocol  ARP
         Switching path    Pkts In   Chars In   Pkts Out  Chars Out
                Process     312641   18770520       3504     210240
           Cache misses          0          -          -          -
                   Fast          0          0          0          0
              Auton/SSE          0          0          0          0

   Protocol  CDP
         Switching path    Pkts In   Chars In   Pkts Out  Chars Out
                Process      79969   33975492      80039   28573329
           Cache misses          0          -          -          -
                   Fast          0          0          0          0
              Auton/SSE          0          0          0          0

   Protocol  Other
         Switching path    Pkts In   Chars In   Pkts Out  Chars Out
                Process       6020     307020     480116   28806960
           Cache misses          0          -          -          -
                   Fast          0          0          0          0
              Auton/SSE          0          0          0          0

   NOTE: all counts are cumulative and reset only after a reload.

-Troy

On Jul 6, 2010, at 11:50 AM, David Coulson wrote:

What does the output of 'sh int switching' look like?

David

On 7/6/2010 2:39 PM, Troy Beisigl wrote:
Actually, we had a bad PA that I replaced, but did not clear the counters. The errors are not incrementing. I just now cleared the counters on this interface to make sure. We installed the VIP4/80 to replace the VIP2/50 that was in there with the same issue except that it was at 99% CPU 40-60% of the time.

-Troy


_______________________________________________
cisco-nsp mailing list  cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/

Reply via email to