2011/7/9 Renelson Panosky <panocisc...@gmail.com>
> I have a couple nexus pod up and running so i just created two more SVI in > my Nexus 7010 with the following configuratons. All my other SVIs are > configured exactly the same way and all of them are UP UP but the two new > one i just add. They are all added to all my trunks and all my trunks are > UP UP. I do know on some devices in the IOS platform the SVI will not come > up until you put a node on it (plug something in oe of the ports assign to > that vlan.) but int he same token some the other SVIs have no nodes on them > and they are UP UP and i can ping them. Any input would be greatly > apprecisted > > > The only requirement is that the vlan the SVI is in actually exists in the switch and that there is a spanning tree instance running for it. If you have those the SVI will show up up even with no ports. (not 100% sure a spanning tree instance will run with no access or trunk ports egressing the vlan though) _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/