Hi everyone. Been having a hard time trying to get a copper SFP to work
on our ME-3600X-24TS-Ms. According to Cisco documentation, the GLC-T
SFP is supposed to be supported on one of the fiber ports. However every
Cisco SFP we've tried always spits back an error message:
Switch#
*Dec 6 19:48:30.448: %PHY-4-SFP_NOT_SUPPORTED: The SFP in Te0/1 is not
supported
*Dec 6 19:48:30.448: %PM-4-ERR_DISABLE: gbic-invalid error detected on
Te0/1, putting Te0/1 in err-disable state
Switch#
Has anyone had any success with trying to use these on this platform?
Fiber based SFPs are fine so long as they're Cisco branded. Are there
different versions of GLC-T that we may have the wrong type?
Thanks.
Jose
_______________________________________________
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
