On 12/10/2012 08:23 PM, Nick Hilliard wrote:
On 10/12/2012 19:12, Lobo wrote:
Hi everyone. Been having a hard time trying to get a copper SFP to work on
our ME-3600X-24TS-Ms. According to Cisco documentation, the GLC-T SFP is
supposed to be supported on one of the fiber ports. However every Cisco SFP
we've tried always spits back an error message:
Switch#
*Dec 6 19:48:30.448: %PHY-4-SFP_NOT_SUPPORTED: The SFP in Te0/1 is not
supported
*Dec 6 19:48:30.448: %PM-4-ERR_DISABLE: gbic-invalid error detected on
Te0/1, putting Te0/1 in err-disable state
in theory, these should be supported but I haven't tried them on this
platform. Have you tried the following commands:
service unsupported-transceiver
no errdisable detect cause gbic-invalid
errdisable recovery cause gbic-invalid
I don't have any Cisco original copper SFPs, but am currently running a
ME3600X-24TS with Transmode Copper SFP's in it successfully with the
above commands entered to allow unsupported-transceivers.
_______________________________________________
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
