Hello, thanks for the info but that does not help in my case, just tried out.
The link confirms: "if traffic matches a special-case rate limiter, it is never compared against the hardware CoPP policy. It will only be compared against the software CoPP policy" So I guess now it is dropped in software instead of hardware. ;) kind regards Rolf > On 27/06/2013 17:36, "Rolf Hanßen" wrote: >> Is there a way to match that "destination IP = connected IP without >> entry >> in arp table" traffic ? I found no such option in the syntax. > > that is a "glean" packet, and is handled using rate limiters, not CoPP: > >> Router(config)#mls rate-limit unicast cef glean ? >> <10-1000000> packets per second > > more info here: > >> http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps708/prod_white_paper0900aecd802ca5d6.html#wp9000211 > > Nick > > > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
