On Sat, Jan 4, 2014 at 10:52 PM, M K <[email protected]> wrote: > Yes I am aware of the ND and EUI-64 methods , but i want to implement this > methodI have configured the below > R1ipv6 dhcp pool POOL address prefix 2001:192:12::/64 domain-name > cisco.com > interface FastEthernet1/0 ipv6 address 2001:192:12::1/64 ipv6 dhcp server > POOL > R2interface FastEthernet1/0 ipv6 address autoconfig > R2#sh ipv6 int bri FastEthernet0/0 [administratively down/down] > unassignedFastEthernet1/0 [up/up] FE80::C801:71FF:FE4A:1C > 2001:192:12:0:C801:71FF:FE4A:1CFastEthernet1/1 [administratively > down/down] unassigned > Now , I can reach this IPv6 address but the binding is not thereR1#sh ipv6 > dhcp binding R1# > Even though i can also activate routing based on these addressesFrom: > [email protected]
Once you enable RA on the router all IPv6 capable clients will get an IP address from the network you are advertising. DHCP in the context of IPv6 (except for PD) is only used if you want to set the client DNS automatically, but in order for the client to go to the DHCP server you need to set the managed bit to the RA messages. Hope this clears things a bit. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
