It means that the input power is to strong, should be no more than -2.0 dBm but is currently 1.8dBm
You can place a attenuator on the RX or on the TX on the other end to bring it below -2 Kveðja, Sibbi On 15.10.2014 14:45, "Harry Hambi - Atos" <[email protected]> wrote: >Hi all, >Can someone help to explain the following error message : >Oct 15 14:39:14.024: %SFF8472-5-THRESHOLD_VIOLATION: Te2/0/1: Rx power >high warning; Operating value >: -1.8 dBm, Threshold value: -2.0 dBm. >Does the message suggest a faulty optic?. Thanks in advance. > > > >Rgds >Harry > >Harry Hambi BEng(Hons) MIET Rsgb > >_______________________________________________ >cisco-nsp mailing list [email protected] >https://puck.nether.net/mailman/listinfo/cisco-nsp >archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
