On 05/03/15 10:00, Gert Doering wrote:
Hi,
On Wed, Mar 04, 2015 at 03:19:09PM -0800, Tim Stevenson wrote:
You do not need MSDP under this configuration, Anycast w/PIM &
Anycast w/MSDP are two different ways to do basically do the same thing.
So, pure curiousity: I know how Anycast w/MSDP works, but with classic
IOS, there is no "Anycast w/PIM" - how is this done, protocol-wise?
The PIM RPs forward the PIM register to the other PIM RPs, if it didn't
come *from* one of those RPs. They do it over "real" IPs rather than the
anycast IP, of course.
It's been around on JunOS for ages, and works great. Never tried it on
supporting Cisco boxen, but I imagine it works just the same.
_______________________________________________
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
