On 15/Jul/15 00:23, Fredrik Vöcks wrote: > Problem is simular to ME3600 when you have wrong SDM installed. > > If you look at current software available to ASR920 it doesn't have > any SDM templates to chose from and the template that is shipped does > not have any MDT capabilites. > > show platform hardware pp active sdm current | i MDT > > So when different templates are released in the future my guess is > that the exchange rate will be 255 MDT routes for 8000 ipv4 unicast > routes.
When I tested NG-MVPN on the ASR920 a few weeks ago, I can't recall if it was in any SDM template mode. I've pinged the Cisco engineer that we did this with to confirm. Will report back. Mark. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
