Ya I tried that too, it still tries to find the wrong ios file and start's its loop again. This one might be a brick.
On Thu, Dec 3, 2020 at 5:15 PM Aaron <[email protected]> wrote: > Try this > > > https://packetlife.net/blog/2010/oct/11/recovering-no-service-password-recovery-service/ > > > On Thursday, December 3, 2020, Aaron <[email protected]> wrote: > >> Looks like you need to talk to TAC. The password recovery being disabled >> is not your friend. >> >> https://community.cisco.com/t5/routing/asr-920-boot-fail/td-p/3834996 >> >> >> On Thursday, December 3, 2020, Scott Miller <[email protected]> wrote: >> >>> The output didn't seem to format well, let's try it again: >>> >>> System Bootstrap, Version 15.5(3r)S2, RELEASE SOFTWARE (fc1) >>> Technical Support: http://www.cisco.com/techsupport >>> Copyright (c) 2015 by cisco Systems, Inc. >>> Compiled Wed 01-Jul-15 03:53 by sdcunha >>> Starting Initialization of FMAN0 >>> Loading ucode for FMAN0, size: 31424, ver: 106.04.14 >>> Silicon Rev Major:Minor [1:1] >>> Initializing the pci.. >>> IOFPGA version[17082912] >>> Boot ROM0 >>> Last reset cause: BootFromUpgradeRegFail >>> UEA platform with 1572863 Kbytes of main memory >>> >>> PASSWORD RECOVERY FUNCTIONALITY IS DISABLED >>> >>> .....Break detected: (0x1) >>> Do you want to reset the router to the factory default >>> configuration and proceed [y/n] ?y >>> >>> Router rebooting with factory default configuration >>> >>> System Bootstrap, Version 15.5(3r)S2, RELEASE SOFTWARE (fc1) >>> Technical Support: http://www.cisco.com/techsupport >>> Copyright (c) 2015 by cisco Systems, Inc. >>> Compiled Wed 01-Jul-15 03:53 by sdcunha >>> Starting Initialization of FMAN0 >>> Loading ucode for FMAN0, size: 31424, ver: 106.04.14 >>> Silicon Rev Major:Minor [1:1] >>> Initializing the pci.. >>> IOFPGA version[17082912] >>> Boot ROM0 >>> Last reset cause: BootFromUpgradeRegFail >>> UEA platform with 1572863 Kbytes of main memory >>> >>> PASSWORD RECOVERY FUNCTIONALITY IS DISABLED >>> >>> .....Resetting upgrade counter from failed upgrade >>> Directory asr920-universalk9_npe.16.06.05a.SPA.bin not found >>> Unable to locate asr920-universalk9_npe.16.06.05a.SPA.bin directory >>> Unable to load asr920-universalk9_npe.16.06.05a.SPA.bin >>> boot: error executing "boot >>> bootflash:asr920-universalk9_npe.16.06.05a.SPA.bin" >>> autoboot: boot failed, restarting... >>> >>> On Thu, Dec 3, 2020 at 4:32 PM Scott Miller <[email protected]> wrote: >>> >>> > I have a ASR-920-12SZ-IM, which I inadvertently entered the wrong boot >>> > command in the config, saved the config and rebooted. Now it's stuck >>> in a >>> > boot loop. I've tried breaking the boot, it asks if I want to reset to >>> > factory default, and I enter "y", it reboots but still tries to find >>> that >>> > same bad ios file I entered in the initial configuration which was >>> supposed >>> > to have been whipped when it went to factory default. I can't for the >>> life >>> > of me figure out how to get into ROMMON on this box. Each time I >>> break the >>> > boot, it just goes back to the same question, asking if I want to >>> factory >>> > default. >>> > >>> > Here's what it's doing: >>> > >>> > >>> > System Bootstrap, Version 15.5(3r)S2, RELEASE SOFTWARE (fc1) Technical >>> > Support: http://www.cisco.com/techsupport Copyright (c) 2015 by cisco >>> > Systems, Inc. Compiled Wed 01-Jul-15 03:53 by sdcunha Starting >>> > Initialization of FMAN0 Loading ucode for FMAN0, size: 31424, ver: >>> > 106.04.14 Silicon Rev Major:Minor [1:1] Initializing the pci.. IOFPGA >>> > version[17082912] Boot ROM0 Last reset cause: BootFromUpgradeRegFail >>> UEA >>> > platform with 1572863 Kbytes of main memory PASSWORD RECOVERY >>> FUNCTIONALITY >>> > IS DISABLED .....Break detected: (0x1) Do you want to reset the router >>> to >>> > the factory default configuration and proceed [y/n] ?y Router rebooting >>> > with factory default configuration System Bootstrap, Version >>> 15.5(3r)S2, >>> > RELEASE SOFTWARE (fc1) Technical Support: >>> http://www.cisco.com/techsupport >>> > Copyright (c) 2015 by cisco Systems, Inc. Compiled Wed 01-Jul-15 03:53 >>> by >>> > sdcunha Starting Initialization of FMAN0 Loading ucode for FMAN0, size: >>> > 31424, ver: 106.04.14 Silicon Rev Major:Minor [1:1] Initializing the >>> pci.. >>> > IOFPGA version[17082912] Boot ROM0 Last reset cause: >>> BootFromUpgradeRegFail >>> > UEA platform with 1572863 Kbytes of main memory PASSWORD RECOVERY >>> > FUNCTIONALITY IS DISABLED .....Resetting upgrade counter from failed >>> > upgrade Directory asr920-universalk9_npe.16.06.05a.SPA.bin not found >>> Unable >>> > to locate asr920-universalk9_npe.16.06.05a.SPA.bin directory Unable to >>> load >>> > asr920-universalk9_npe.16.06.05a.SPA.bin boot: error executing "boot >>> > bootflash:asr920-universalk9_npe.16.06.05a.SPA.bin" autoboot: boot >>> failed, >>> > restarting... >>> > >>> > The boot file bootflash:asr920-universalk9_npe.16.06.05a.SPA.bin is >>> > invalid and does not exist. The correct file which is on the box >>> > is bootflash:asr920igp-universalk9_npe.16.06.05a.SPA.bin >>> > >>> > Anyone know how to break into ROMMON to blow out this config? I've >>> been >>> > at it for a couple hours, nothing I've found googling seems to work. >>> > >>> > Thanks. >>> > >>> _______________________________________________ >>> cisco-nsp mailing list [email protected] >>> https://puck.nether.net/mailman/listinfo/cisco-nsp >>> archive at http://puck.nether.net/pipermail/cisco-nsp/ >>> >> _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
