I have a ASR-920-12SZ-IM, which I inadvertently entered the wrong boot command in the config, saved the config and rebooted. Now it's stuck in a boot loop. I've tried breaking the boot, it asks if I want to reset to factory default, and I enter "y", it reboots but still tries to find that same bad ios file I entered in the initial configuration which was supposed to have been whipped when it went to factory default. I can't for the life of me figure out how to get into ROMMON on this box. Each time I break the boot, it just goes back to the same question, asking if I want to factory default.
Here's what it's doing: System Bootstrap, Version 15.5(3r)S2, RELEASE SOFTWARE (fc1) Technical Support: http://www.cisco.com/techsupport Copyright (c) 2015 by cisco Systems, Inc. Compiled Wed 01-Jul-15 03:53 by sdcunha Starting Initialization of FMAN0 Loading ucode for FMAN0, size: 31424, ver: 106.04.14 Silicon Rev Major:Minor [1:1] Initializing the pci.. IOFPGA version[17082912] Boot ROM0 Last reset cause: BootFromUpgradeRegFail UEA platform with 1572863 Kbytes of main memory PASSWORD RECOVERY FUNCTIONALITY IS DISABLED .....Break detected: (0x1) Do you want to reset the router to the factory default configuration and proceed [y/n] ?y Router rebooting with factory default configuration System Bootstrap, Version 15.5(3r)S2, RELEASE SOFTWARE (fc1) Technical Support: http://www.cisco.com/techsupport Copyright (c) 2015 by cisco Systems, Inc. Compiled Wed 01-Jul-15 03:53 by sdcunha Starting Initialization of FMAN0 Loading ucode for FMAN0, size: 31424, ver: 106.04.14 Silicon Rev Major:Minor [1:1] Initializing the pci.. IOFPGA version[17082912] Boot ROM0 Last reset cause: BootFromUpgradeRegFail UEA platform with 1572863 Kbytes of main memory PASSWORD RECOVERY FUNCTIONALITY IS DISABLED .....Resetting upgrade counter from failed upgrade Directory asr920-universalk9_npe.16.06.05a.SPA.bin not found Unable to locate asr920-universalk9_npe.16.06.05a.SPA.bin directory Unable to load asr920-universalk9_npe.16.06.05a.SPA.bin boot: error executing "boot bootflash:asr920-universalk9_npe.16.06.05a.SPA.bin" autoboot: boot failed, restarting... The boot file bootflash:asr920-universalk9_npe.16.06.05a.SPA.bin is invalid and does not exist. The correct file which is on the box is bootflash:asr920igp-universalk9_npe.16.06.05a.SPA.bin Anyone know how to break into ROMMON to blow out this config? I've been at it for a couple hours, nothing I've found googling seems to work. Thanks. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
