That's definitely worth a look, thanks. On Fri, Dec 4, 2020 at 5:18 AM Cassidy B. Larson <[email protected]> wrote:
> I believe the bootflash is an SD card inside, you could pop it out and see > if you can modify it on another asr920 or device, renaming the new filename > to the one it's looking for. Long shot, but who knows, might work? > > On Thu, Dec 3, 2020 at 5:24 PM Scott Miller <[email protected]> wrote: > >> Ya I tried that too, it still tries to find the wrong ios file and start's >> its loop again. This one might be a brick. >> >> On Thu, Dec 3, 2020 at 5:15 PM Aaron <[email protected]> wrote: >> >> > Try this >> > >> > >> > >> https://packetlife.net/blog/2010/oct/11/recovering-no-service-password-recovery-service/ >> > >> > >> > On Thursday, December 3, 2020, Aaron <[email protected]> wrote: >> > >> >> Looks like you need to talk to TAC. The password recovery being >> disabled >> >> is not your friend. >> >> >> >> https://community.cisco.com/t5/routing/asr-920-boot-fail/td-p/3834996 >> >> >> >> >> >> On Thursday, December 3, 2020, Scott Miller <[email protected]> >> wrote: >> >> >> >>> The output didn't seem to format well, let's try it again: >> >>> >> >>> System Bootstrap, Version 15.5(3r)S2, RELEASE SOFTWARE (fc1) >> >>> Technical Support: http://www.cisco.com/techsupport >> >>> Copyright (c) 2015 by cisco Systems, Inc. >> >>> Compiled Wed 01-Jul-15 03:53 by sdcunha >> >>> Starting Initialization of FMAN0 >> >>> Loading ucode for FMAN0, size: 31424, ver: 106.04.14 >> >>> Silicon Rev Major:Minor [1:1] >> >>> Initializing the pci.. >> >>> IOFPGA version[17082912] >> >>> Boot ROM0 >> >>> Last reset cause: BootFromUpgradeRegFail >> >>> UEA platform with 1572863 Kbytes of main memory >> >>> >> >>> PASSWORD RECOVERY FUNCTIONALITY IS DISABLED >> >>> >> >>> .....Break detected: (0x1) >> >>> Do you want to reset the router to the factory default >> >>> configuration and proceed [y/n] ?y >> >>> >> >>> Router rebooting with factory default configuration >> >>> >> >>> System Bootstrap, Version 15.5(3r)S2, RELEASE SOFTWARE (fc1) >> >>> Technical Support: http://www.cisco.com/techsupport >> >>> Copyright (c) 2015 by cisco Systems, Inc. >> >>> Compiled Wed 01-Jul-15 03:53 by sdcunha >> >>> Starting Initialization of FMAN0 >> >>> Loading ucode for FMAN0, size: 31424, ver: 106.04.14 >> >>> Silicon Rev Major:Minor [1:1] >> >>> Initializing the pci.. >> >>> IOFPGA version[17082912] >> >>> Boot ROM0 >> >>> Last reset cause: BootFromUpgradeRegFail >> >>> UEA platform with 1572863 Kbytes of main memory >> >>> >> >>> PASSWORD RECOVERY FUNCTIONALITY IS DISABLED >> >>> >> >>> .....Resetting upgrade counter from failed upgrade >> >>> Directory asr920-universalk9_npe.16.06.05a.SPA.bin not found >> >>> Unable to locate asr920-universalk9_npe.16.06.05a.SPA.bin directory >> >>> Unable to load asr920-universalk9_npe.16.06.05a.SPA.bin >> >>> boot: error executing "boot >> >>> bootflash:asr920-universalk9_npe.16.06.05a.SPA.bin" >> >>> autoboot: boot failed, restarting... >> >>> >> >>> On Thu, Dec 3, 2020 at 4:32 PM Scott Miller <[email protected]> >> wrote: >> >>> >> >>> > I have a ASR-920-12SZ-IM, which I inadvertently entered the wrong >> boot >> >>> > command in the config, saved the config and rebooted. Now it's >> stuck >> >>> in a >> >>> > boot loop. I've tried breaking the boot, it asks if I want to >> reset to >> >>> > factory default, and I enter "y", it reboots but still tries to find >> >>> that >> >>> > same bad ios file I entered in the initial configuration which was >> >>> supposed >> >>> > to have been whipped when it went to factory default. I can't for >> the >> >>> life >> >>> > of me figure out how to get into ROMMON on this box. Each time I >> >>> break the >> >>> > boot, it just goes back to the same question, asking if I want to >> >>> factory >> >>> > default. >> >>> > >> >>> > Here's what it's doing: >> >>> > >> >>> > >> >>> > System Bootstrap, Version 15.5(3r)S2, RELEASE SOFTWARE (fc1) >> Technical >> >>> > Support: http://www.cisco.com/techsupport Copyright (c) 2015 by >> cisco >> >>> > Systems, Inc. Compiled Wed 01-Jul-15 03:53 by sdcunha Starting >> >>> > Initialization of FMAN0 Loading ucode for FMAN0, size: 31424, ver: >> >>> > 106.04.14 Silicon Rev Major:Minor [1:1] Initializing the pci.. >> IOFPGA >> >>> > version[17082912] Boot ROM0 Last reset cause: BootFromUpgradeRegFail >> >>> UEA >> >>> > platform with 1572863 Kbytes of main memory PASSWORD RECOVERY >> >>> FUNCTIONALITY >> >>> > IS DISABLED .....Break detected: (0x1) Do you want to reset the >> router >> >>> to >> >>> > the factory default configuration and proceed [y/n] ?y Router >> rebooting >> >>> > with factory default configuration System Bootstrap, Version >> >>> 15.5(3r)S2, >> >>> > RELEASE SOFTWARE (fc1) Technical Support: >> >>> http://www.cisco.com/techsupport >> >>> > Copyright (c) 2015 by cisco Systems, Inc. Compiled Wed 01-Jul-15 >> 03:53 >> >>> by >> >>> > sdcunha Starting Initialization of FMAN0 Loading ucode for FMAN0, >> size: >> >>> > 31424, ver: 106.04.14 Silicon Rev Major:Minor [1:1] Initializing the >> >>> pci.. >> >>> > IOFPGA version[17082912] Boot ROM0 Last reset cause: >> >>> BootFromUpgradeRegFail >> >>> > UEA platform with 1572863 Kbytes of main memory PASSWORD RECOVERY >> >>> > FUNCTIONALITY IS DISABLED .....Resetting upgrade counter from failed >> >>> > upgrade Directory asr920-universalk9_npe.16.06.05a.SPA.bin not found >> >>> Unable >> >>> > to locate asr920-universalk9_npe.16.06.05a.SPA.bin directory Unable >> to >> >>> load >> >>> > asr920-universalk9_npe.16.06.05a.SPA.bin boot: error executing "boot >> >>> > bootflash:asr920-universalk9_npe.16.06.05a.SPA.bin" autoboot: boot >> >>> failed, >> >>> > restarting... >> >>> > >> >>> > The boot file bootflash:asr920-universalk9_npe.16.06.05a.SPA.bin >> is >> >>> > invalid and does not exist. The correct file which is on the box >> >>> > is bootflash:asr920igp-universalk9_npe.16.06.05a.SPA.bin >> >>> > >> >>> > Anyone know how to break into ROMMON to blow out this config? I've >> >>> been >> >>> > at it for a couple hours, nothing I've found googling seems to work. >> >>> > >> >>> > Thanks. >> >>> > >> >>> _______________________________________________ >> >>> cisco-nsp mailing list [email protected] >> >>> https://puck.nether.net/mailman/listinfo/cisco-nsp >> >>> archive at http://puck.nether.net/pipermail/cisco-nsp/ >> >>> >> >> >> _______________________________________________ >> cisco-nsp mailing list [email protected] >> https://puck.nether.net/mailman/listinfo/cisco-nsp >> archive at http://puck.nether.net/pipermail/cisco-nsp/ >> > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
