Provided you ISDN TA is a sync TA, bcoz the serial port of 2501 is a sync
serial port.
rgs,
lee
"John Neiberger" <[EMAIL PROTECTED]> wrote in message
28127067.959358464405.JavaMail.imail@tiptoe">news:28127067.959358464405.JavaMail.imail@tiptoe...
> I've been handed a 3COM ISDN terminal adapter and have been told that we
are
> planning to use ISDN as dial backup for a T-1 connecting to a 2501. One
> serial port and the ethernet port are being used. The aux port won't
> provide the needed bandwidth. So that leaves me with the second serial
> port.
>
> Is it possible to use a serial port on a 2501 in conjunction with a TA
for
> ISDN DDR? I've been searching cisco's site and haven't found any mention
of
> how to accomplish this. My suggestion at this point is to buy a 2520 and
> use the BRI interface instead.
>
> Any suggestions on how to make this work?
>
> Thanks, as always!
>
> John Neiberger
>
>
>
>
>
> _______________________________________________________
> Get 100% FREE Internet Access powered by Excite
> Visit http://freelane.excite.com/freeisp
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> ---
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
