MAC addresses are carried in non-canonical format in DLSW. If your running
a protocol converter on the Ethernet segment and have created a peer mac
address, make sure you do the conversion. This is also true of any peer
statements you have in the routers.
I did an install like this about 3 years ago and that was the only "issue" I
had.
JOE
CCIE #5917
"Mohan" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
>
> Hi gurus, i have this problem getting a token-ring attached FEP 3746
> talking to a Ethernet attached SNA client over a back-to-back frame-relay
> network configured for DLSW+. I followed the instructions and guidelines
> provided on the cisco DLSW+ docs, however, i fails to get the
configuration
> work. I hope you gurus can shed some light and help me with this.
>
> the following are my observations:
>
> 1. Initially, the interface and line protocol on to0 (Hostrouter) was up,
> however shortly after the client was configured the interface gone into
> shutdown state and i fail to do a no shut, no response and remained at
> shutdown state, i'm only able to do a no shut after removing the
> souce-bridge 9 1 11 statement from the hostrouter. any idea why is this
> happening. I have even tried upgrading the ios from 11.1 to 11.2 on the
> hostrouter.
>
> 2. I have checked the cables and cards and confirm to be working fine.
>
> 3. on the remote router, the dlsw peer reach output was showing the client
> searching for the 3746 MAC but the session never came-up.
>
> i have attached the config. and show outputs, pls. help to get this
problem
> fixed. PLS. HELP.
>
> thank you,
>
> mohan
>
> FR
> Ethernet
> |3746|----|ring 9|-----|host router|---------------|remote
> R|-----------------|client|
>
> sh run
> Building configuration...
>
>
>
> Current configuration:
> !
> version 11.2
> no service password-encryption
> service udp-small-servers
> service tcp-small-servers
> !
> hostname Hostrouter
> !
> enable secret 5 $1$Fw2W$g97jlFnPbudx14b2qBeGO.
> enable password router
> !
> source-bridge ring-group 2000
> dlsw local-peer peer-id 150.150.1.1
> dlsw remote-peer 0 tcp 150.150.2.1
> !
> interface Loopback0
> ip address 150.150.1.1 255.255.255.0
> !
> interface Serial0
> ip address 150.150.100.1 255.255.255.0
> encapsulation frame-relay IETF
> no fair-queue
> frame-relay map ip 150.150.100.2 70
> frame-relay lmi-type ansi
> !
> interface Serial1
> no ip address
> shutdown
> !
> interface TokenRing0
> no ip address
> shutdown
> ring-speed 16
> source-bridge 9 1 2000
> source-bridge spanning
> !
> no ip classless
> !
> !
> line con 0
> line aux 0
> line vty 0 4
> password cisco
> login
> !
> end
>
> Hostrouter#sh dlsw peers
> Peers: state pkts_rx pkts_tx type drops ckts TCP
> uptime
> TCP 150.150.2.1 DISCONN 0 0 conf 0 0 -
> -
>
> Hostrouter#sh dlsw peers reach
> DLSw Local MAC address reachability cache list
> Mac Addr status Loc. port rif
>
> DLSw Remote MAC address reachability cache list
> Mac Addr status Loc. peer
>
> DLSw Local NetBIOS Name reachability cache list
> NetBIOS Name status Loc. port rif
>
> DLSw Remote NetBIOS Name reachability cache list
> NetBIOS Name status Loc. peer
>
> Hostrouter#
>
>
> Remote#sh run
> Building configuration...
>
>
>
> Current configuration:
> !
> version 12.0
> service timestamps debug uptime
> service timestamps log uptime
> no service password-encryption
> !
> hostname Remote
> !
> !
> ip subnet-zero
> ip host HQ 150.150.100.1
> frame-relay switching
> !
> !
> !
> !
> source-bridge ring-group 2000
> dlsw local-peer peer-id 150.150.2.1
> dlsw remote-peer 0 tcp 150.150.1.1
> dlsw bridge-group 1
> !
> !
> !
> interface Loopback0
> ip address 150.150.2.1 255.255.255.0
> no ip directed-broadcast
> !
> interface Ethernet0/0
> ip address 150.150.30.1 255.255.255.0
> no ip directed-broadcast
> bridge-group 1
> !
> interface Serial0/0
> ip address 150.150.100.2 255.255.255.0
> no ip directed-broadcast
> encapsulation frame-relay IETF
> no ip mroute-cache
> no fair-queue
> frame-relay map ip 150.150.100.1 70
> frame-relay lmi-type ansi
> frame-relay intf-type dce
> !
> interface Serial0/1
> no ip address
> no ip directed-broadcast
> shutdown
> !
> no ip classless
> !
> !
> bridge 1 protocol dec
> !
> line con 0
> transport input none
> line aux 0
> session-timeout 20000
> no exec
> exec-timeout 0 0
> modem InOut
> transport input all
> stopbits 1
> line vty 0 4
> password cisco
> login
> !
> end
>
> Remote#sh dlsw peers
> Peers: state pkts_rx pkts_tx type drops ckts TCP
> uptime
> TCP 150.150.1.1 DISCONN 0 0 conf 0 0 -
> -
> Total number of connected peers: 0
> Total number of connections: 0
>
> Remote#sh dlsw peers reach
> DLSw Local MAC address reachability cache list
> Mac Addr status Loc. port rif
>
> DLSw Remote MAC address reachability cache list
> Mac Addr status Loc. peer
>
> DLSw Local NetBIOS Name reachability cache list
> NetBIOS Name status Loc. port rif
>
> DLSw Remote NetBIOS Name reachability cache list
> NetBIOS Name status Loc. peer
>
> Remote#
> Remote#
> Remote#
> Remote#
> 04:38:03: DLSw: START-TPFSM (peer 150.150.1.1(2065)): event:ADMIN-OPEN
> CONNECTION state:DISCONN
> 04:38:03: DLSw: dtp_action_a() attempting to connect peer
150.150.1.1(2065)
> 04:38:03: DLSw: CONN: peer 150.150.1.1 open failed, unreachable [17]
> 04:38:03: DLSw: CONN failed - retries 67
> 04:38:03: DLSw: END-TPFSM (peer 150.150.1.1(2065)): state:DISCONN->WAIT_WR
>
> 04:38:03: DLSw: Processing delayed event:TCP-ASYNC OPEN FAILED - prev
> state:WAIT_WR
> 04:38:03: DLSw: START-TPFSM (peer 150.150.1.1(2065)): event:TCP-ASYNC OPEN
> FAILED state:WAIT_WR
> 04:38:03: DLSw: dtp_action_b() close connection for peer 150.150.1.1(2065)
> 04:38:03: DLSw: END-TPFSM (peer 150.150.1.1(2065)): state:WAIT_WR->DISCONN
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]