Yep, all you need is to configure the Helper address (ip helper-address
[address]) command on Router1, and as long as Router1 has route to LAN3
(whether by static or routing protocol... and Router3 has route back to
LAN1).
See, Router1 will take the DHCP broadcasts and convert them into unicast
packets and send them directed to LAN3. For the "address" argument in the
command you can use the specific IP of the DHCP server or use the broadcast
address for that network (192.168.100.255).
garyf
----- Original Message -----
From: "Cai, Land" <[EMAIL PROTECTED]>
To: "'Cisco (E-mail)'" <[EMAIL PROTECTED]>
Sent: Sunday, June 04, 2000 8:52 PM
Subject: ask for help on DHCP
> Dear gang,
>
> I have the following situation.
>
> Ethernet LAN1----Router1-----------Router2----(TokenRing
> LAN1)-----Router3---------Ethernet LAN3
> |
> |
> |
> |
> |
> |
> Router4
> Router4
>
>
> Let 's say Ethernet LAN1 has the ip segment 192.168.1.*/24,
> Ethernet LAN3 has the IP segment 192.168.100.*/24,
> I want the clients on Ethernet LAN1 can get ip address from
> DHCP server located in Ethernet LAN3 automatically. Can I get it to
> reality? I do only need to configure the IP helper address for Ethernet
> interface on the router1, don't I? Or I need to configure something on
> router1, 2, 3?
>
> Thanks in advance,
> Cai, land
>
>
>
>
>
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
