Hello:
I have two 2503 and I am following Hutnik's to configure OSPF.
I connected RouterA, s0 (DCE) to RouterB, s0(DTE).
When I enter #show ip ospf int I see the following:
...
Transmit Delay is 1 sec, State DOWN
Hello due in...
...
The State should be "POINT_TO_POINT".
The routers don't see each other. (#show ip route doesn't display OSPF
entry).
I entered "no shut" and "shut" in both routers s0 interfaces but it didn't
work. Any idea of what is wrong ?
Configurarion is below.
THanks,
RouterA
!
hostname RouterA
!
int Loopback0
ip add 10.1.1.1 255.255.255.0
int Loopback1
ip add 11.1.1.1 255.255.255.0
!
int S0
ip add 192.1.1.1 255.255.255.0
no fair-queue
router ospf 64
network 192.1.1.1 0.0.0.0 area 0
network 10.1.1.1 0.0.0.0 area 0
!
no ip classless
!
...
RouterB
!
hostname RouterB
!
int loopack0
ip add 152.1.1.1 255.255.255.0
int Loopback1
ip add 153.1.1.1 255.255.255.0
!
int serial0
ip add 192.1.1.2 255.255.255.0
no fair-queue
clockrate 500000
!
int s1
no ip add
shutdown
!
router ospf 64
network 0.0.0.0 255.255.255.255
!
no ip classless
!
...
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
