Why not start by doing a "sh int s0" to check the physical connectivity?
Kenny
----- Original Message -----
From: "Benjamin Walling" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, June 06, 2000 10:17 AM
Subject: Re: OSPF configuration - Please help
>
>
> Are you able to ping the other router? Do you see it with 'sh cdp nei'?
Also,
> you should do 'shut' then 'no shut'. The other way around shuts down the
> interfaces (the way you said below). Also, on Router B, I see no
indication of
> an area statement. IE: network 192.1.1.0 0.0.0.255 area 0. There is a
network
> statement under router ospf, but I am not familiar enough to know the
effects of
> putting 0.0.0.0 0.0.0.0 in that statement. My understanding is that you
must
> give it an area (although if you don't, it may default to area 0).
>
> Ben
>
>
>
>
>
>
>
> "Billy Monroe" <[EMAIL PROTECTED]> on 06/06/2000 12:14:15 PM
>
> Please respond to "Billy Monroe" <[EMAIL PROTECTED]>
>
>
>
>
>
>
>
>
> To: [EMAIL PROTECTED]
>
> cc: (bcc: Benjamin Walling/HQ/INDECON)
>
>
>
> Subject: OSPF configuration - Please help
>
>
>
>
>
>
>
>
>
> Hello:
>
> I have two 2503 and I am following Hutnik's to configure OSPF.
> I connected RouterA, s0 (DCE) to RouterB, s0(DTE).
>
> When I enter #show ip ospf int I see the following:
> ...
> Transmit Delay is 1 sec, State DOWN
> Hello due in...
> ...
>
>
> The State should be "POINT_TO_POINT".
> The routers don't see each other. (#show ip route doesn't display OSPF
> entry).
> I entered "no shut" and "shut" in both routers s0 interfaces but it didn't
> work. Any idea of what is wrong ?
>
>
> Configurarion is below.
>
>
> THanks,
>
>
>
>
>
>
>
>
>
> RouterA
>
>
> !
> hostname RouterA
> !
> int Loopback0
> ip add 10.1.1.1 255.255.255.0
>
>
> int Loopback1
> ip add 11.1.1.1 255.255.255.0
> !
> int S0
> ip add 192.1.1.1 255.255.255.0
> no fair-queue
> router ospf 64
> network 192.1.1.1 0.0.0.0 area 0
> network 10.1.1.1 0.0.0.0 area 0
> !
> no ip classless
> !
> ...
>
>
> RouterB
>
>
> !
> hostname RouterB
> !
> int loopack0
> ip add 152.1.1.1 255.255.255.0
> int Loopback1
> ip add 153.1.1.1 255.255.255.0
> !
> int serial0
> ip add 192.1.1.2 255.255.255.0
> no fair-queue
> clockrate 500000
> !
> int s1
> no ip add
> shutdown
> !
> router ospf 64
> network 0.0.0.0 255.255.255.255
> !
> no ip classless
> !
> ...
>
>
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
>
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
