Daryn,
Try using different IP addresses other than ones that end in x.x.x.0 That
might help. :)
-Brad
p.s. I hope you dont have any missle codes...lol
""Bartlett, DS1"" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> I have a 2509 access router with 8 modems attached. This past weekend I
> installed a PIX 515. Now when users dial-in they receive very slow
> connections. I tried to ping various Internet hosts and found that 60-80%
> packet loss occurred. I turned on
>
> Debug ip icmp
>
> Ran a trace to my server at home and received this message
>
> dst (10.100.7.0) port unreachable rcv from X.X.X.190 (home server).
>
> 10.100.7.0 is the IP of my E0 interface on the 2509 and it further says
>
> sent to 10.100.1.0 --> which is the IP of my inside server.
>
> Enlightenment would be greatly appreciated. I have some very angry users
> who are on the road, including my big boss, an Admiral in the US Navy.
>
> Thanx all
> Daryn P. Bartlett
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> ---
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]