Hi Brad:
I checked 1601 spec, it says the serial port is both able to do async and
sync. I am trying to connect a DB60 to DB25 for my analog modem. I have a
V.35 DTE and V.35 DCE with RS232 connector. I don't know the pinout so I
wonder...
TIA,
RH
Brad Ellis wrote:
> which port are you trying to connect to???? the serial DB60 port??? are
> you going to use a synchronous modem? if I recall, I didnt think the DB60
> on a 1601 did async...
>
> if you are trying to connect the modem to the console port for out of band
> management, that's another story. Ive got the cable you need sitting right
> here. shoot me an e-mail and we can work something out.
>
> -brad
> "lanatic" <[EMAIL PROTECTED]> wrote in message
> [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> >
> > Hi:
> >
> > I am trying to connect my Cisco 1601 to analog modem, can anyone
> > tell me what cable to use? Should I use CAB-232MT (DB60 to RS232, male)
> > or CAB-232FC (female)? or both will do?
> >
> > RH
> >
> >
> >
> > ___________________________________
> > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> > FAQ, list archives, and subscription info: http://www.groupstudy.com
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> > ---
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> ---
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
