Okay, that work for me. You should use the V.35DCE w/ RS232 connector for your modem. -Brad "lanatic" <[EMAIL PROTECTED]> wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Hi Brad: > > I checked 1601 spec, it says the serial port is both able to do async and > sync. I am trying to connect a DB60 to DB25 for my analog modem. I have a > V.35 DTE and V.35 DCE with RS232 connector. I don't know the pinout so I > wonder... > > TIA, > RH > > > > Brad Ellis wrote: > > > which port are you trying to connect to???? the serial DB60 port??? are > > you going to use a synchronous modem? if I recall, I didnt think the DB60 > > on a 1601 did async... > > > > if you are trying to connect the modem to the console port for out of band > > management, that's another story. Ive got the cable you need sitting right > > here. shoot me an e-mail and we can work something out. > > > > -brad > > "lanatic" <[EMAIL PROTECTED]> wrote in message > > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > > > > > Hi: > > > > > > I am trying to connect my Cisco 1601 to analog modem, can anyone > > > tell me what cable to use? Should I use CAB-232MT (DB60 to RS232, male) > > > or CAB-232FC (female)? or both will do? > > > > > > RH > > > > > > > > > > > > ___________________________________ > > > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > > > FAQ, list archives, and subscription info: http://www.groupstudy.com > > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > > > --- > > > > ___________________________________ > > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > > FAQ, list archives, and subscription info: http://www.groupstudy.com > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > > --- > > ___________________________________ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
