Try this.
controller T1 0
framing esf
linecode b8zs
channel-group 1 timeslots 1-24 speed 64
loop-detect
Darrin Gibson
Darrin Gibson
AL-ARNG WO1
Network Manager DCSIM
MCSE, MCP+I
(334)213-7551, (DSN)363-7551
-----Original Message-----
From: Mark [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, June 13, 2000 11:20 AM
To: [EMAIL PROTECTED]
Subject: Cisco 2611 T1/CSU/DSU Module
Hey we have a T1 CSU/DSU module connected to a dedicated T1 line. We are
having problems getting the interface and the line "UP". Does anyone have a
sample config or recommendations, we have tried about all config options,
setting line rates, clock etc. We are just stumped on this one.
Thanks,
Mark
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
