Why don't you send us copies of your config from both sides. It is hard to
troubleshoot without any info.
Moshe
> -----Original Message-----
> From: Mark [mailto:[EMAIL PROTECTED]]
> Sent: Tuesday, June 13, 2000 12:20 PM
> To: [EMAIL PROTECTED]
> Subject: Cisco 2611 T1/CSU/DSU Module
>
>
> Hey we have a T1 CSU/DSU module connected to a dedicated T1
> line. We are
> having problems getting the interface and the line "UP".
> Does anyone have a
> sample config or recommendations, we have tried about all
> config options,
> setting line rates, clock etc. We are just stumped on this one.
>
> Thanks,
> Mark
>
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
