I just did this procedure last week with a 2620 w/T1 module connecting to a
Kentrox CSU/DSU on the other end. Here's the doc that helped me.
http://www.cisco.com/warp/public/471/52.html
In my instance, I had to pay particular attention to data-coding, timeslots,
and linecode.
Hope that helps,
Francis Arigo, MCSE, CCNA
System Administrator
Classroom Connect
-----Original Message-----
From: Mark [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, June 13, 2000 9:20 AM
To: [EMAIL PROTECTED]
Subject: Cisco 2611 T1/CSU/DSU Module
Hey we have a T1 CSU/DSU module connected to a dedicated T1 line. We are
having problems getting the interface and the line "UP". Does anyone have a
sample config or recommendations, we have tried about all config options,
setting line rates, clock etc. We are just stumped on this one.
Thanks,
Mark
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
