Dear Friends,
I have some question wo answer, pls guide if u can, I have quite a number of
question, reply me part of the question, if u don't know all
1)It Takes three Packets to start a TCP session, how many packet are used to
close it
2)To enter the setup mode on a router with no configuration you must type?
What command?
3)How do you list the current IPX server in the network on a cisco router
4)If u want to bridge a protocol out a routed interface you can use?
A IBM spanning tree
B)Intergrated routing and bridging
C)SRB
D)TB
E)SR/TLB
P/S: I dun understand the meaning of question 4, can help?
5)Ethernet network can be considered as congested at ......% utilization?
6)Which are true about Full Duplex
a)can be used between hubs
b)can be used between switches
c)can be used between a switch and a router
d)can be used among Ethernet station
7)Which of the following describe frame filtering
a)Examines info about a frame based on user defined offset
b)Uses a frame filtering table
c)High level administrative control
d)Is similar in function to packet filtering in a router
8)An Internal IPX number is required by what servers and protocol
a)IPX RIP router
b)NLSP capable device
c)IPX server
d)NSLP server
e) all
9)which layer of OSI provide synchronization between address and name
database?
10)When subnet and addressing is applied in numerical order this is known
as?
11)To enable terminal editing, what is the min privilege level?
12)What command to disable CDP broadcast on a specific interface, what
commnad ? what mode?
13) how many segment to setup a TCP connection>?
14) how many ip address can be assigned against a particular host using the
ip host command
15) TCP/IP connectivity can be checked using ?
a)ping
b)trace
c)telnet
16)what command to check the periodic update of RIP>?
17)What is not a valid metric for IGRP
a)Bandwidth
b)Delay
c)Reliabity
d)loading
Sorry for the long mail, :)
==================================================================
De informatie opgenomen in dit bericht kan vertrouwelijk zijn en
is uitsluitend bestemd voor de geadresseerde. Indien u dit bericht
onterecht ontvangt wordt u verzocht de inhoud niet te gebruiken en
de afzender direct te informeren door het bericht te retourneren.
==================================================================
The information contained in this message may be confidential
and is intended to be exclusively for the addressee. Should you
receive this message unintentionally, please do not use the contents
herein and notify the sender immediately by return e-mail.
==================================================================
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
