"Kevin L. Kultgen" wrote:
> > 2)To enter the setup mode on a router with no configuration you
> > must type? What command?
>
> setup
If it *really* has no config, it will come up in setup mode :-)
> > 5)Ethernet network can be considered as congested at
> > ......% utilization?
>
> Every company has a different standard. I've commonly heard 60%
> and 75%, one was Cisco's I think it was 75%.
And half/full duplex have different "congestion" ratings.
> > 6)Which are true about Full Duplex
> > a)can be used between hubs
> > b)can be used between switches
> > c)can be used between a switch and a router
> > d)can be used among Ethernet station
> > 8)An Internal IPX number is required by what servers and protocol
> > a)IPX RIP router
> > b)NLSP capable device
> > c)IPX server
> > d)NSLP server
> > e) all
>
> I'd guess E. Haven't done a whole bunch of IPX or NLSP
IPX RIP doesn't require an internal network.
> > 15) TCP/IP connectivity can be checked using ?
> > a)ping
> > b)trace
> > c)telnet
>
> ping of coure, trace is usually used as a backup to ping, and telnet
> tests the whole stack.
ping is ICMP. trace (on cisco router) is UDP. telnet is TCP.
> > 16)what command to check the periodic update of RIP>?
>
> Don't remember, never used rip - (show ip rip ?)
sho ip protocol
Jeff Kell <[EMAIL PROTECTED]>
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
